hi all. if you have been thinking of getting the dash tray with the cover ( where the sat nav normally sits) and have had difficulty removing it - here is how: it is not the same as the US type [url="http://www.is300.net/forum/viewtopic.php?topic=13295447&forum=4&11"]http://www.is300.net/forum/viewtopic.php?t...5447&forum=4&11[/url]

click above for pics, to remove ours you need to pry up the tray edge above the air controls with a VERY thin screwdriver ( to avoid damaging the console) there are 2 clips, once that edge is up you can pull the tray out.

Im putting this here as i nearly broke my felt tray!! ( it is screwed down not held by clips)

cheers robbie.

Hi Robbie

Looks like a good feature for the workshop category! :smilegrin:

well if u want i can do it with a few more details, I have a few more " how to remove" etc for the interior ( im finding out as im fitting my parking sensors)

robbie.

that would be great robbie...

would be good to get alot of IS200 stuff into the workshop as the majority of the club owns an IS200/300

my old banger is too rare to even put in the workshop... not many in the UK that is!

no probs steve, ill do it here and then you can move it to workshop and edit the other messages?

robbie.