L&G

I have recently converted almost all of my lights (except headlights & dash) to LED bulbs - these are easily the highest quality and brightest LED products available today. None of these products are available in the UK.

All of these bulbs and load resistors are simple to fit!

If there is sufficient interest, I am prepared to do a Group Buy on these bulbs. Shipping costs to the UK play a big part of the price, so obviously the more peeps who are interested the cheaper the price.

Prices will be discounted based upon orders of 1-5, 6-10, over 10

Based upon the IS model, but I'm sure these are common to all the Lexus range:

Prices are per pair (not interior light), delivered to you


501 (sidelights, side indicators, door lights) - Super White, Blue, Green, Red, Amber (per pair)

1 - 5 £12.80
6 - 10 £12.00
>10 £11.20


31mm Dome Interior light - Super White, Blue, Green, Red, UV (single bulb)

1 - 5 £8.25
6 - 10 £7.70
>10 £7.20


Front indicators 7440 - super wide angle Amber (per pair)

1 - 5 £32.90
6 - 10 £30.85
>10 £28.80


Rear indicator 1156 - super wide angle Amber (per pair)

1 - 5 £34.75
6 - 10 £32.60
>10 £30.50


Reversing 7440 - Super White, Blue (per pair)

1 - 5 £24.00
6 - 10 £22.30
>10 £20.80


Rear fogs (red lens) 7440/7443 single/duel element - Super White (per pair)

or

Rear fogs (clear lens) 7440/7443 single/duel element - Red

1 - 5 £32.90
6 - 10 £30.85
>10 £28.80


Load Resisitors - required for front & rear LED bulbs (one pair front & one pair required for rear)

1 - 5 £12.80
6 - 10 £12.00
>10 £11.20


BA9 Interior Map light (single bulb)

1 - 5 £7.00
6 - 10 £6.65
>10 £6.30


Any other types, please contact me.

Can vouch for the quality on the LED's. got a set of reversing bulbs of mike and the colour they put out is so crisp its unbelievable! can well reccomend to anyone interested

definatly intrested mate, can i see some pics..as a comparison

Yep......will get piccies posted up in the morning!

yup, could well be interested in a few of those.

pics if poss please mate

I am defo intrested in getting most of these.

Interior light green:




Interior light blue:




Interior light red:




Interior light super white:




Rear indicator 1156 amber:




501 super white:




501 red:




501 blue:




Front indicator 7440 amber:




Load resistor for use with F/R LED indicator bulbs. One load resistor is required each side front & rear. Comes supplied with clips to attach between the live and earth. Takes only 2 mins to attach each one, no electrical skills required, only a pair of pliers or crimping tool!




Clear Rear brake / fog 7440 single filament or 7443 dual filament:




Red Rear brake / fog 7440 single filament or 7443 dual filament (for use with clear lenses):




Reversing 7440 super white:




Reversing 7440 blue:

They look fantastic Mike - have you got them all on your car? If so, I'll take a peek tomorrow...

Do we have any pictures on an actual car, ie the brakes etc.

Would give a better idea of how they look.

Yep - LED's everywhere except headlights!

Let me see what I can do.......might be difficult for the indicators though

Here we go......

You can't really see the full effect of the indicators here, but anyone who sees them on Saturday will confirm the brightness and crisp flashing:

I so want that TTE Rear lip! They look good (The LED's) Cheers - Now condsidering.

TTE rear lip will be up for sale next week.....Offers considered!

Pardon my stupidity but why the load resistors? Are the bulbs above recomended wattage or something?

Will the clear 7440s fit in the front indicators cos I don't have the indicator mod?

LED indicators draw a very low current, unless load resistors are fitted the bulbs will "doulble flash"

Yes - the clear 7440's will fit your front indicators

ME ME ME ME ME ME ME ME ME!

Have I said it enough ME!!!!!!!

With fittings etc, couldn't tell you how much they are new...........

My reversing bulbs arrived (with quite a thud) through the letterbox this morning. Whoppers aren't they, Mike!
I note though that you recommend the red brake/fog bulbs for clear lenses. I'd recommend them for red too, as the red light will all get through the lens. The white one will be emitting blue and green light for nothing, as the lens will absorb it all. In other words I'd expect the red ones to be brighter than the whites when fitted behind a red lens.

You know the way the indicators flash like mad when a bulb's gone? That's what you'll get without the resistors.

Are they the blue or the super white reverse lights you have on your car there, Mike?

The reversing bulbs don't fit the Mk.2 GS.

The bulbs shown in these piccies are the super white.

The blue bulbs are here:

only thing your missing is the dash......

Actually Old Bean, I'm quite a fan of the standard colour

oh dear lol

Wow. You can count me in for the lot. (I'll work out what colours tomorrow.)

Good work.

(I've not put the reversing leds you sent me yet. )

S.

Put me down on the list as well

Mike any chance of the following,

501 sidelights in blue (if blue will fail the MOT then super white please).
501 side indicators in amber
Interior light in blue
Rear fog lights in red for the clear lenses i have. (not sure if its single or double filament I need, I haven't done the brake mod so I guess 7440 single).
Rear indicators 1156
and also as many load resistors as i need.

PM me how much, how you want me to pay and where too.

Thanks
Lee.

I'd rather hang on a little longer - that way the price will be lower.

Let's put a close date on for January 1st

Meanwhile if all interested can PM me with their requirements of types/colours/numbers I'll be able to confirm prices.

Mike

You have a PM Mr Morse

Mike,

You got any pixies for front indicators

It won't capture well on digital.......

But the light is very crisp and vivid.......like the indicators on new BM's

ere, were has my posts gone fromthis thread...... i hope it wasnt cause someone deemed my post as off topic.....
but just to re-iterate, so people are informed... i asked the question abotu the legality of having red blue/white light shining to the rear of the vehicle as would be the case in the door led kits.

anyways as mike pointed out, it does not form part of the MOT, which is correct...
however the The Road Vehicles Lighting Regulations 1989 part II says No vehicle shall be fitted with a lamp which is capable of showing a red light to the front ........ therefore the door led kits would be illegal....
but since when do we care about that anyways.... but just be forewarned guys...

OK....I have orders so far from the following members:

Kazi
Moffet
Mr Lex
Lee_Iceman
Parthiaban
StainlessSteelRat (please confirm the types / colours you need)

Any more interested?

Please PM me with your requirements or any questions you may have.

Order book closes 1st Janaury 2006

what's the latest on this mr morse

At the moment there is not enough interest to go ahead with a GB

But I'll keep it open for a while longer if anyone else wants to come in

I'm moving it into the Group Buy section mate, so that people can see the thread listed in that forum.

OK....looks like there might be enough interest to go ahead with this GB

I've PM'd those of you who have posted here for your requirements and will get back to you with prices. Anyone else interested please drop me a PM.

Is this still going ahead? I didn't get a PM....

Looks like you missed out this time around, the bulbs arrived while I was away and I'll post them out on Monday

Nevermind, I'll just have to find them somewhere else

I didn't get a PM either

Anyone know where I can get a 9 LED blue interior dome light from?

Guys, sorry you missed out....but I'm far too busy to have to go chasing up anyone who may have expressed an interest in the GB.

If there are any more members interested I'll run another one so long as there's enough buyers to cover the high cost of shipping from the US

Hello, has anyone tried to fit the rear indicators on the IS200, if so how did you manage it as my bulb holder has the alignment holes at 10 to 2 rather than straight accross as the LED bulbs have.

Cheers
Lee.

Easy solution - just file down one of the pins. This is what I've done and the bulb fits perfectly.

LOL, didn't even think of that, got too much going on today Does it lock in ok with only one pin then?

Yep, it locks fine. I've never had a problem.

my post error