i need a bit of help fitting a HKS FCD i have the black ECU fitted and need to fit the new fcd colours are diffrent from the black ecu and the manual is in a diffrent language just need to know what colour wires go to what eg:what colour from the old ecu will be replaced from the new ecu
thanks
wayne

What colours you got ? Stav has post on the other topic what colour go where Mate.

i have red,black,white and yellow will also do a quick serch

Yellow on the FCD to where the Green of the black box was. and Vice versa. Red to red, black to black

just found stavs post thanks for looking aswell gord

Did you get the one off ebay ?

Yeah thats right mate, red to red, black to black. then yellow to green, and white to yellow.

Stav

Has anyone got this guide together yet?

J

Red to red, black to black. then yellow to green, and white to yellow And something to join the wires together
Set @ 8 on the HKS fcd

Go on Wayne, slap a picture on here when you've done it too

J

I have a word document sent to me by TDi, but for some reason my
Word package on my pc doesnt seem to like it.

Problem sorted.


I also have a Word or pdf document, send me your email addy by PM please if
you need me to send it to you, but the picture above enlarged should be enough.

all fitted just need to change the settings to get the power back i have it on setting 10 at the moment anyone know if that is to high it just wasnt right on 8 or 9. wozza did you fit yours yet

No its not too high, the higher the safer,

But if you go too high you'll hit the fuel cut when booting it, so if your not doing that then its right.

Stav

I am advised 8 or 9 on HKS FCD Wayne.
Hope this helps ya

may try a diffrent seeting the weekend as it still doesnt feel the same in lower gear

Steve set the last one @ 9

I never realised that IS200's have a fuel cut?

Anyway, how is the SC Wayne? Everything alright? Haven't forgotten about the manifold, I'm just too busy to get it sorted!