Anybody know of a reputable arch rolling service provider in the Midlands area? Or has anybody tried this company?
http://www.archenemy.co.uk
Full Version: Arch Rolling
Hi mate,
I needed my rears doing slightly with the 255/40x18's I'm running.
The company I used is in Romford Essex, and are BMW related.
In the end I opted for a slight cut (about 3-4mm) rather than a roll,
they then double re sealed the paintwork, all done in 50 mins for £55 inc vat.
I needed my rears doing slightly with the 255/40x18's I'm running.
The company I used is in Romford Essex, and are BMW related.
In the end I opted for a slight cut (about 3-4mm) rather than a roll,
they then double re sealed the paintwork, all done in 50 mins for £55 inc vat.
Thanks for the info Wozza, may I double check you got 255/40 in the rear? Looking at the wheel size guide it recommends 255/35, and as mine is lowered 30mm on TTEs, I figured I will need arch rolling as per guide.
Any particular reason why you chose a cut instead or a roll?
Does this company you used offer arch rolling service?
Any particular reason why you chose a cut instead or a roll?
Does this company you used offer arch rolling service?
yes mate 255/40x18's as per IS250 Sport rims OE size, my suspension is not lowered though.
The arch roller was broken (had been loaned out the day before) when I had mine done but I am sure it would be replaced by now.
Only needed a little roll, but it was bugging me like mad with a very minor scrape on one side every now and again so just had it done.
They removed the same amount off on both sides just in case of any future problems.
http://www.bmwmstyle.co.uk/ is the company.
They were very helpful to me when I was there, and they were very interested in the S/C IS200.
Took one of the guys for a spin when it was done
The arch roller was broken (had been loaned out the day before) when I had mine done but I am sure it would be replaced by now.
Only needed a little roll, but it was bugging me like mad with a very minor scrape on one side every now and again so just had it done.
They removed the same amount off on both sides just in case of any future problems.
http://www.bmwmstyle.co.uk/ is the company.
They were very helpful to me when I was there, and they were very interested in the S/C IS200.
Took one of the guys for a spin when it was done
i had my rears done at R-tec in st albans, really good! but dont think they done it as cheap as wozza got... the fronts i heated and dolled back myself.
For future reference, service provided by www.archenemy.co.uk is excellent.
The service can also be arranged via WIM if you happen to go there for a geo calibration or other work.
The service can also be arranged via WIM if you happen to go there for a geo calibration or other work.
Top info, would have had them do mine if they had answered the email I sent in late Feb.
(still awaiting a reply
)
(still awaiting a reply
)
good info,well worth knowing 
archenemy.co.uk started off on SXOC (200SX owner's club) and the guy is highly regarded.
I just bought a few arch rollers & did my SX myself. Don't need to do the LS400 yet as it's still on the original 205/65s
I just bought a few arch rollers & did my SX myself. Don't need to do the LS400 yet as it's still on the original 205/65s
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.