Hi all just replaced my old plugs with new denso ones and now the engine management light is on????
Everything seems to be running ok starts up fine etc .
Is it worth disconnecting the battery and seen if it clears itself?
Webby
Full Version: Denso Plugs
Have you connected everything up? Nothing is unplugged? This is what I would check 1st. If all is ok, then reset the ECU (by disconnecting the battery or pulling out the fuses, can't remember which ones now). If all is well, the CEL should go out, if not, then something else is causing the problem.
QUOTE(kam05 @ Jun 4 2008, 04:52 PM) 
Have you connected everything up? Nothing is unplugged? This is what I would check 1st. If all is ok, then reset the ECU (by disconnecting the battery or pulling out the fuses, can't remember which ones now). If all is well, the CEL should go out, if not, then something else is causing the problem.
Yeah checked all plugs wires etc, will reset ecu tomorrow and hopefully all will be well thanks
have u left the wire for the air temp sensor off? its easily done.... and will cause the light to come on
thats what i did with mine rob and light came on plug'd it back in and disconnected the battery light went out
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.