Had this Saturday free so went and fitted a few mods HID's, Scangauge, Exhaust trim.
This Topic is for HID Conversion kit.
Really easy to fit - bought from www.hids4u.co.uk £ 99.00 + pp = £ 104.00 total - I went for the 9006 range 6000 brightness HS4 bulb conversions.
Took me about 1 hour but was being very cautious and checking everything as I went along. (Could easily be done in half an hour now as I know the routine)
Only problem was no double sided sticky pads in kit - phoned and they had none in stock but will send cable ties !! I went to B&Q but none - helpful guy there said try Halfords - number plate fixings - ideal. (I bought to 2 packs £ 2.49 each but you could get away with 1)
Have attached a few pics.
Instructions recommend a 'dry' run of installation to check bulbs etc. well worth it - all OK.
I fitted them and did not work - no panic - all you need to do is turn the connection into the existing bulb fitting - bingo !
If you need any further info pm me no probs. Only difficulty was on passenger side - a little tight for space so undid the existing indicator bulb and front sidelight bulb so that loom could be moved to allow greater access to rear of dipped light.
Plenty of cable length on kit so mounting was easy against suspension turrets.
Drivers side ballast location
HID Kit plus sticky pads
Passenger side Indicator bulb & sidelight removal for access to dipped bulb
Passenger side ballast location
Passenger side wiring
