Help - Search - Members - Calendar
Full Version: Wheel Balancing
Lexus Owners Club > Lexus Models > Lexus GS 300 / Lexus GS 430 / Lexus 450h / Lexus GS 460
finest1
hi all,

i noticed that around 50-60 mph my steering vibrates/wobbles. i took it into kwikfit and asked him to balance the wheels. he said to me to come back once i've got it confirmed that the wishbone is fine and the ball joints. is he just turning me away, or is it a genuine tip. also, can i do this myself? if so, how, or do i need to get a garage to look at it. problem is, a garage may say yes the ball joints are shot, and i wouldn't know if that was true or not!

many thanks

finest1 smile.gif
wheels-inmotion.co.uk
Rubbish..... Does the car wander or have any knocking sounds?..... If the answer is "No, no" then it's a balance issue.
aaronabbott
last time i went to kwikfit the lad balanced my tyres on my old peugeot gave me the bill,fair enough i thought as soon as i started driving it was worse than ever it felt as if the car was falling apart from under me.so i took it to ats and the wheels were so out of balance the bloke couldnt believe it but he sorted it and gave me a sort of print out which i took backto kwikfit the same day and kicked off at the manager and fair enough he refunded my money and gave me a free brake and winter check.go somewhere else and get it done properly
dave1
QUOTE(aaronabbott @ Jul 12 2008, 08:41 PM) *
last time i went to kwikfit the lad balanced my tyres on my old peugeot gave me the bill,fair enough i thought as soon as i started driving it was worse than ever it felt as if the car was falling apart from under me.so i took it to ats and the wheels were so out of balance the bloke couldnt believe it but he sorted it and gave me a sort of print out which i took backto kwikfit the same day and kicked off at the manager and fair enough he refunded my money and gave me a free brake and winter check.go somewhere else and get it done properly


KwikFit give free brake and free winter check anyway. I take it you used the one on Foleshill Road?
I have used the Nuneaton branch for several years and found them excellent. I started using Nuneaton branch because of the very shoddy service at Coventry. I think a lot depends on the manager and how he trains/treats his staff but I have never had anything but excellent service from the Nuneaton branch.
aaronabbott
QUOTE(dave1 @ Jul 13 2008, 06:17 AM) *
QUOTE(aaronabbott @ Jul 12 2008, 08:41 PM) *
last time i went to kwikfit the lad balanced my tyres on my old peugeot gave me the bill,fair enough i thought as soon as i started driving it was worse than ever it felt as if the car was falling apart from under me.so i took it to ats and the wheels were so out of balance the bloke couldnt believe it but he sorted it and gave me a sort of print out which i took backto kwikfit the same day and kicked off at the manager and fair enough he refunded my money and gave me a free brake and winter check.go somewhere else and get it done properly


KwikFit give free brake and free winter check anyway. I take it you used the one on Foleshill Road?
I have used the Nuneaton branch for several years and found them excellent. I started using Nuneaton branch because of the very shoddy service at Coventry. I think a lot depends on the manager and how he trains/treats his staff but I have never had anything but excellent service from the Nuneaton branch.



yeah the foleshill road one
dave1
Thought it must have been--everything about the place is rubbish. Not all branches are the same though.
finest1
thanks

no the car does not wander and no knocking sounds

i thought it might be the balancing.

someone recommended me to a good place so i'll take it there

thanks
wheels-inmotion.co.uk
QUOTE(finest1 @ Jul 14 2008, 07:37 PM) *
thanks

no the car does not wander and no knocking sounds

i thought it might be the balancing.

someone recommended me to a good place so i'll take it there

thanks


Anywhere that uses the Huweka mounting method (by the stud holes) not the centre hole.
Hando
QUOTE(finest1 @ Jul 14 2008, 07:37 PM) *
someone recommended me to a good place so i'll take it there

thanks


See above post.

Mate - take it to wim - it's worth the journey. They have the best kit and most importantly you can trust Tony et al. to fix the problem (or if they can't - not to fob you off with excuses to make you go away)
finest1
thanks for your replies

what or where is WIM?
TigerFish
Wheels In Motion near Hemel Hempstead.
TigerFish
QUOTE(wheels-inmotion.co.uk @ Jul 14 2008, 07:43 PM) *
QUOTE(finest1 @ Jul 14 2008, 07:37 PM) *
thanks

no the car does not wander and no knocking sounds

i thought it might be the balancing.

someone recommended me to a good place so i'll take it there

thanks


Anywhere that uses the Huweka mounting method (by the stud holes) not the centre hole.


Is it wheel dependent, or more a wheel defect dependent? I have had mine balanced without problems at kwikfit in Derby and also Speedies in Derby. Just wondered why balancing seems to be a problem on some cars but not others?
wheels-inmotion.co.uk
QUOTE(TigerFish @ Jul 16 2008, 06:49 PM) *
QUOTE(wheels-inmotion.co.uk @ Jul 14 2008, 07:43 PM) *
QUOTE(finest1 @ Jul 14 2008, 07:37 PM) *
thanks

no the car does not wander and no knocking sounds

i thought it might be the balancing.

someone recommended me to a good place so i'll take it there

thanks


Anywhere that uses the Huweka mounting method (by the stud holes) not the centre hole.


Is it wheel dependent, or more a wheel defect dependent? I have had mine balanced without problems at kwikfit in Derby and also Speedies in Derby. Just wondered why balancing seems to be a problem on some cars but not others?


Non OEM wheels are more prone to problems..... Point to remember the centre hole is "cosmetically central".
finest1
thanks all,

hemel is too far for me.

i can't access parts of the website, i wanted to get prices just to see what is offered

thanks
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2008 Invision Power Services, Inc.