Well i was speaking about getting new aloyWheels from my IS200 i looked for Chrome ones but Neva really found what i wanted ! i did see a nice Par of Ebay and went yesterday To portsmouth to see if they Fitted ... No Comment on thats !!! - sed it wud fit -

So i found new per there

Metal Type:
Aluminium
Tyre Type:
Summer

Rim Width:
8J
Tyre Width:
225

Rim Diameter:
18 inches
Aspect Ratio:
40

Offset:
30
Load Index:
92

Number of Studs:
5
Speed Rating:
ZR: over 150 mph

Stud Diameter:
114

AND MY CAR BEEN LOWERD 40MM

PICTURE OF THE ALLOYS : http://foto.artdecor.eu/ebay/Al1.jpg

Offset 30 will not fit

As Gord says they won't fit, but do quite like the look of those wheels

Well thay will fit................but your car will look like, bigfoot sort of car

I just wondered is offset measured in mm? So if you need about 45 for the IS, and these are 30, they'd stick out 15mm more than they should from the arch?

Yep mate

I also will give my Lex new Wheels...

ULTRALITE WHEELS

Greats, Luke

Hi, make sure you get the right offset for your car, as when i was looking @ ultralite wheels for my is200, most of the one's i wanted would not fit, due to the offset

SO REEALY your guys are saying im Screwed wer can i find LEXUS WHEELS ?
i give up !
is its not the Stud size then its the offset if its not taht its something els

CAN YOU GUYS POST ME UR LINK WER YOU GOT YOUR WHEELS !????

MUST BE 18inch ! wheels

those will not fit either

the offset needs to be between 40 and 50mm dependant on width and style of wheel !
on 8" wide they need to be as close to 45 as you can get
if the car is lowered or going to be it is important the offset is correct or they will scrub the arches

from here !



try here

[/quote]
Hi, make sure you get the right offset for your car, as when i was looking @ ultralite wheels for my is200, most of the one's i wanted would not fit, due to the offset
[/quote]

Thank you for the advice, this one would fit:

ULGT2-1875-1GL - 18"X7.5" - 42 - 100+114.3 X 5 GOLD
Tyre's would be: 225 40 - 18

Greats, Luke

LOL JAPAN ? LOL CHEAKY thing !!! ok thats no good bazza dont help me please joking in there any UK place ? or do i have 2 import them ?

and ya mate its LOWERD 40mm

here !!

That's exacly the specs that my wheels are. I noticed they are just millimeters inside the wheel arches when they are pointing straight forward. However, these were sold with the L-tuned IS300 so I suppose they are legal.

I THINK ... i found some !

and my cars lowered 40mm !

http://www.alloy-wheels-shop.co.uk/p1039129.htm


look liek the will fit all the size are right just cant
see the off set

PCD: 5x100/114 ET 40
PCD: 4x100/114 ET 40
PCD: 4x100/108 ET 40
PCD: Blank ET 40

so 40 offset

I have some 19"s for sale that I no longer need. They are the kei kruze in hypersilver and I had them on my IS300 which was lowered on Eibach springs and didnt have any problems. Heres a linky - http://www.keiracing.com/wheels_kruze.html

Ive got a set of these i might be tempted to sell

http://www.tdi-plc.com/catalog/product_inf...roducts_id=4228

There in need of a referb but as your looking at spending over £1000 you can buy these off me refurb them for under that.

pm me if your interested

A couple of photos on the car

moved to wheels and tyres section,

Had you searched before buying all the wheels

and found this topic, in this section

BASIC WHEEL AND TYRE SIZE

it would have made things so much easier for you

i was in the same boat looking for wheels for my lexus, the offset is a major pain, but i've finally found some i like in the correct offset and a nice staggered fit too. i'm not going to tell anyone what they are because i've never seen them on a japanese car before