i am going to take my headlights apart to clean inside the plastic lens if i spray the chrome gloss or metallic black and de tango them with orange bulbs will they still be legal?

can the rear lights be done the same?

yes they will be legal....Billions of people have done it

the rear are possible but harder

whats involved in the rear that different to fronts, are they harder to take apart?

cheers

The fronts you can just put them in the oven for a few minutes to melt the glue holding them together,

Whereas the rears are fully sealed so you have to cut them open with a dremel or similar.

Stav

ah that doesnt sound so good, lol. might just leave them then an possibly try get the fogs to work as brake lights instead, seen a thread on that in here somewhere

cheers

this isn't legal either i'm afraid mate, pretty sure it will fail a MOT too

I've just done my rear light clusters, not as much as a faff as i thought they were going to be. You just have to be handy with a dremel. I took care with the first lense then having a bit of practice got the second lense off in about 10 minutes.

But if you connect it right, its a matter of undoing a crimp and its not there any more

I've had my conversion for nearly two years (one of my first mods) and i've had no problems with PD.

do you have a link to the post on how to do it?? would be very gratefull. seen it on a lex and it looks sweet

cheers

Had Pete not done that on what is now your IS .......loads of guys have done that dont think it will have probs with MOT

Urm yes he has had it done , but always thought it was a MOT failure?

as long as it can be changed back for an hour for mot i would be happy lol

Did the fog/brakelight conversion ages ago on mine and it passed the MOT on the last 2 visits since i did it, as all they are is extra brake lights and the fogs still work if you need them on

still trying to find the link in the search. is it easy enough to do

mine didn't ............

mind you, the pulse sequencer's aren't legal (so i was informed )

Its in the workshop mate, Very easy to do

Here you go CLICK ME :-)

thanks alot mate. life saver. where did you get the 2 diodes from? electricians supply store?

cheers

Got mine from www.maplin.co.uk matey about 74p each over here, think you can order them online if you get stuck finding them? part number is P600A and the order number is UK59P for them

cheers mate there a maplin just down street from me, might give it a go tomorrow

thanks again

Not so, lots have had it done and pass MOT

cheers for getting me that link aztec got it done on tuesday looks sweet.

I'm gonna remember that one Mat