Help - Search - Members - Calendar
Full Version: Hanging Onto Gears
Lexus Owners Club > Lexus Models > Lexus GS 300 / Lexus GS 430 / Lexus 450h / Lexus GS 460
wow300
OK i have just had my headgasket done

http://www.lexusownersclub.co.uk/forum/ind...showtopic=53905

and now it hanging onto gears on the lightest of throttle, does not change till 2600rpm and overdrive is very reluctant, anything that could have been left off or a pipe on wrong somewhere ? help its doing my head in, and using more fuel !
dave1
QUOTE(wow300 @ Oct 22 2008, 10:22 AM) *
OK i have just had my headgasket done

http://www.lexusownersclub.co.uk/forum/ind...showtopic=53905

and now it hanging onto gears on the lightest of throttle, does not change till 2600rpm and overdrive is very reluctant, anything that could have been left off or a pipe on wrong somewhere ? help its doing my head in, and using more fuel !

I'm no expert but could it be your ECU has gone "out of sync"
Mark W
Take it back to whoever did the head gasket and let them sort it out.....

bigdavegrr
Something to try might be a ECU reset. Might cure it.
wow300
Ye was thinking about that, how, fuse somewhere ?
Lambaj
Might be a vacuum line in the wrong place, or kinked. Often (although I'm not sure about the GS), the auto senses the load on the engine via a vacuum line from the inlet manifold. If this vacuum signal is not correct, the box could easily get confused.... OR its all electronic and I'm just too old skool to know better!
Tony
wow300
ye i have had a good look at the vacuum pipes all look correct, could do with a good pic to compare them all...
Glyn Davies
QUOTE(wow300 @ Oct 27 2008, 12:55 PM) *
ye i have had a good look at the vacuum pipes all look correct, could do with a good pic to compare them all...

Hiya WOW...try the ECU reset first as it costs nothing to do. The fuse is under the bonnet - look it up on the cover - take out the fuse for about 45 seconds and then replace. If this doesn't do the trick then take the car back.....

Glyn
wow300
Tried that, no change.. think ill do a gearbox oil change and the filter....
wow300
I think i know what it is, found i have 1 front brake binding !

Will look at it as soon as i can,a pain at the mo as busy working!
wow300
Yep... thats what it was.
Still going to change the gearbox oil though when i get chance.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2009 Invision Power Services, Inc.