hey I have seen the kits on ebay for changing the orange dash to blue, item number==> 270328079919 , would it be cheaper to just buy the right leds and fit them? and what ones are needed?

If you just want to do the clocks matey, you need 3x501 Leds and 2xT5 Leds, try and find the inverted wide angle ones as there pretty good, i did mine ages ago now and never had any problems with them

[quote name='aztecbandit1' post='636887' date='Feb 13 2009, 11:36 AM']If you just want to do the clocks matey, you need 3x501 Leds and 2xT5 Leds, try and find the inverted wide angle ones as there pretty good, i did mine ages ago now and never had any problems with them [/quote]

hey thanks for the quick reply, is there anywhere you would recommend for buying them?

These are the 501 leds i have in mine at the moment [url="http://cgi.ebay.co.uk/10pcs-501-W5W-Inverted-LED-Spark-Blue-Wedge-Bulbs_W0QQitemZ200307059908QQihZ010QQcategoryZ72233QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262"] [b]CLICK ME [/b][/url]

And these are the T5's [url="http://cgi.ebay.co.uk/10pcs-286-Wide-Angle-LED-Spark-Blue-Dash-Wedge-Bulbs_W0QQitemZ370154509934QQihZ024QQcategoryZ28644QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262"] [b]CLICK AGAIN [/b][/url]

Never had a problem with the seller but do take a few days to arrive

[quote name='aztecbandit1' post='636891' date='Feb 13 2009, 11:49 AM']These are the 501 leds i have in mine at the moment [url="http://cgi.ebay.co.uk/10pcs-501-W5W-Inverted-LED-Spark-Blue-Wedge-Bulbs_W0QQitemZ200307059908QQihZ010QQcategoryZ72233QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262"] [b]CLICK ME [/b][/url]

And these are the T5's [url="http://cgi.ebay.co.uk/10pcs-286-Wide-Angle-LED-Spark-Blue-Dash-Wedge-Bulbs_W0QQitemZ370154509934QQihZ024QQcategoryZ28644QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262"] [b]CLICK AGAIN [/b][/url]

Never had a problem with the seller but do take a few days to arrive [/quote]


hey thats brilliant thanks, had found the 501's on a uk site but they are twice as expensive not including shipping, have ya got any pics of how your clocks look now?

here's a pic of mine matey

[img]http://i76.photobucket.com/albums/j7/pclarke82/DSC00029.jpg[/img]

And heres mine gone for a mixed look, got a better pic somewhere
[img]http://www.lexusownersclub.co.uk/forum/uploads/monthly_10_2007/post-12038-1192810361.jpg[/img]

[quote name='aztecbandit1' post='636909' date='Feb 13 2009, 12:32 PM']And heres mine gone for a mixed look, got a better pic somewhere
[img]http://www.lexusownersclub.co.uk/forum/uploads/monthly_10_2007/post-12038-1192810361.jpg[/img][/quote]


both look brilliant, think i will be ordering myself some leds now, the 2 t5's which ones do these replace, was having a look and there is about 20 different bulbs in the back,

[quote name='ciarancassidy' post='636911' date='Feb 13 2009, 12:36 PM'][quote name='aztecbandit1' post='636909' date='Feb 13 2009, 12:32 PM']And heres mine gone for a mixed look, got a better pic somewhere
[img]http://www.lexusownersclub.co.uk/forum/uploads/monthly_10_2007/post-12038-1192810361.jpg[/img][/quote]


both look brilliant, think i will be ordering myself some leds now, the 2 t5's which ones do these replace, was having a look and there is about 20 different bulbs in the back,
[/quote]

Theres only 5 you need to change mate think there all blue holders looking at the back of the clocks the 3x501's are for the big centre dial and the 1xT5 is for the fuel gauge side and the other T5 is the rev counter side? The bulbs you need to swap have little orange rubber caps on them so you know which are the ones that need to be changed

[quote name='aztecbandit1' post='636923' date='Feb 13 2009, 12:57 PM'][quote name='ciarancassidy' post='636911' date='Feb 13 2009, 12:36 PM'][quote name='aztecbandit1' post='636909' date='Feb 13 2009, 12:32 PM']And heres mine gone for a mixed look, got a better pic somewhere
[img]http://www.lexusownersclub.co.uk/forum/uploads/monthly_10_2007/post-12038-1192810361.jpg[/img][/quote]


both look brilliant, think i will be ordering myself some leds now, the 2 t5's which ones do these replace, was having a look and there is about 20 different bulbs in the back,
[/quote]

Theres only 5 you need to change mate think there all blue holders looking at the back of the clocks the 3x501's are for the big centre dial and the 1xT5 is for the fuel gauge side and the other T5 is the rev counter side? The bulbs you need to swap have little orange rubber caps on them so you know which are the ones that need to be changed
[/quote]

brilliant, my list of stuff i want to buy for the car is growing, bring on payday

[quote name='ciarancassidy' post='636925' date='Feb 13 2009, 12:59 PM'][quote name='aztecbandit1' post='636923' date='Feb 13 2009, 12:57 PM'][quote name='ciarancassidy' post='636911' date='Feb 13 2009, 12:36 PM'][quote name='aztecbandit1' post='636909' date='Feb 13 2009, 12:32 PM']And heres mine gone for a mixed look, got a better pic somewhere
[img]http://www.lexusownersclub.co.uk/forum/uploads/monthly_10_2007/post-12038-1192810361.jpg[/img][/quote]


both look brilliant, think i will be ordering myself some leds now, the 2 t5's which ones do these replace, was having a look and there is about 20 different bulbs in the back,
[/quote]

Theres only 5 you need to change mate think there all blue holders looking at the back of the clocks the 3x501's are for the big centre dial and the 1xT5 is for the fuel gauge side and the other T5 is the rev counter side? The bulbs you need to swap have little orange rubber caps on them so you know which are the ones that need to be changed
[/quote]

brilliant, my list of stuff i want to buy for the car is growing, bring on payday
[/quote]

Yeh i know how that list grows too, i only wanted a sports grill and have ended up with all this below on mine so far VVVVVVV

[quote name='aztecbandit1' post='636930' date='Feb 13 2009, 01:13 PM'][quote name='ciarancassidy' post='636925' date='Feb 13 2009, 12:59 PM'][quote name='aztecbandit1' post='636923' date='Feb 13 2009, 12:57 PM'][quote name='ciarancassidy' post='636911' date='Feb 13 2009, 12:36 PM'][quote name='aztecbandit1' post='636909' date='Feb 13 2009, 12:32 PM']And heres mine gone for a mixed look, got a better pic somewhere
[img]http://www.lexusownersclub.co.uk/forum/uploads/monthly_10_2007/post-12038-1192810361.jpg[/img][/quote]


both look brilliant, think i will be ordering myself some leds now, the 2 t5's which ones do these replace, was having a look and there is about 20 different bulbs in the back,
[/quote]

Theres only 5 you need to change mate think there all blue holders looking at the back of the clocks the 3x501's are for the big centre dial and the 1xT5 is for the fuel gauge side and the other T5 is the rev counter side? The bulbs you need to swap have little orange rubber caps on them so you know which are the ones that need to be changed
[/quote]

brilliant, my list of stuff i want to buy for the car is growing, bring on payday
[/quote]

Yeh i know how that list grows too, i only wanted a sports grill and have ended up with all this below on mine so far VVVVVVV
[/quote]

yeah i have had the car about a month now, and everytime i am on here i see something i want to do, moved the horns, painted the light clusters and fit angel eye's, next up is do the dash and get hids, then i want a double din cd player, but there has been a lot dont to it already aswell, trd kit fitted, completely debadged, 18" rota wheels on it, lowered,

& Mine

[img]http://i252.photobucket.com/albums/hh37/Lexus2D/My%20Lexus%20IS200%20Sport/DSC03126.jpg[/img]

[quote name='Lexus2D' post='637018' date='Feb 13 2009, 03:43 PM']& Mine

[img]http://i252.photobucket.com/albums/hh37/Lexus2D/My%20Lexus%20IS200%20Sport/DSC03126.jpg[/img][/quote]

looks class, will have to order those leds as soon as i can,

[quote name='ciarancassidy' post='637021' date='Feb 13 2009, 03:46 PM'][quote name='Lexus2D' post='637018' date='Feb 13 2009, 03:43 PM']& Mine

[img]http://i252.photobucket.com/albums/hh37/Lexus2D/My%20Lexus%20IS200%20Sport/DSC03126.jpg[/img][/quote]

looks class, will have to order those leds as soon as i can,
[/quote]

To do what i did to mine and 2D's above mate you'll only need the 3x501 leds to get the rainbow effect or you could try different colour like Phil further up

Sounds like you have a nice motor mate and look forward to seeing how your modding comes on

Cheers, Aztecbandit. 1 of my blue led dash bulbs has started flickering (think its just loose) but the light spread is crap so if im gonna open the dials again i'm gonna replace them all and was having trouble finding some decent led's. All bought now

Really need to change my photo - car doesn't really look like that anymore.

my first green on the left has started being a little tempremental. gonna have to have a look why i get time. cant see how it works loose tho?

i am just sticking some photos of my car on the comp now so will be sticking them in my angel eyes thread in about 15 mins

Well seeing were all showing are dashes...

Didnt wanna be left out!



Got my bulbs from them super lum guys in the states.. well worth it.. ( i think)

has anyone changed the clock and a/c controls to blue aswell and also the ignition ring? what bulbs are needed to do these, planning on changing my headunit so figured while i am at it i will change the colour of the lights there.

Its been done, there LOADS of threads about it.

If you do a search theres various options.

stav

does the is200 and altezza use the same type of bulbs? thanks

andy

[quote name='ciarancassidy' post='651953' date='Apr 2 2009, 11:18 AM']has anyone changed the clock and a/c controls to blue aswell and also the ignition ring? what bulbs are needed to do these, planning on changing my headunit so figured while i am at it i will change the colour of the lights there.[/quote]

The ignition ring is just a T5 bulb mate, but the A/C unit is a wee bit harder. Some have use a LED strip, but I couldn't get mine to fit right, so I butchered the LED holder and a T5 LED and wired it in that way. Its not that bright though so will be changing it shortly

[quote name='Malky IS200' post='651974' date='Apr 2 2009, 12:32 PM'][quote name='ciarancassidy' post='651953' date='Apr 2 2009, 11:18 AM']has anyone changed the clock and a/c controls to blue aswell and also the ignition ring? what bulbs are needed to do these, planning on changing my headunit so figured while i am at it i will change the colour of the lights there.[/quote]

The ignition ring is just a T5 bulb mate, but the A/C unit is a wee bit harder. Some have use a LED strip, but I couldn't get mine to fit right, so I butchered the LED holder and a T5 LED and wired it in that way. Its not that bright though so will be changing it shortly
[/quote]

i just seen this write up on changing the a/c controls,

[url="http://my.is/forums/f90/how-change-climate-control-center-console-leds-pics-360155/"]http://my.is/forums/f90/how-change-climate...ds-pics-360155/[/url]

he has changed his to white

just ordered my bulbs for the dials, thanks to aztecbandit for all the help, also putting in lights in the footwells, so will take photo's as i am doing it and stick em up, gonna take a while to be delivered though

bulbs for the dash arrived today, so will be sticking them in once i get home, will take pics along the way and put them up, my light strips for the footwells will be here next week so will doing the same once they arrive

Just fitted the LEDs to the dash but I'm not sure they are all working correctly compared to the dash pics shown on this thread......it looks a bit dark, especially where the MPH should be on the bottom of the speedo.


What do you guys think?

[img]http://pic50.picturetrail.com/VOL482/3191867/20414961/362396122.jpg[/img]

Keith

2 of my bulbs were like that so i pulled out the connector bits for a better connection and turned 1 bulb round it it was a lot brighter

The led's only work one way Keith have you tried turning them round in there holders?

Cheers guys.........think I'll take them all out tomorrow and put them back in one at a time, should be the easiest way to ensure they are all working correctly.

The ignition ring works fine though....lol.

Keith

You guys don't like orange?? I think the standard dash looks pretty cool.

[quote name='routerbooter' post='660641' date='Apr 27 2009, 10:38 PM']You guys don't like orange?? I think the standard dash looks pretty cool.[/quote]

It does look cool.....but red looks better

The orange is ok but IMHO it looks a bit dated these days. My dash is still orange at the moment, but I do intend to put some LEDs in there at some stage.

here is my dash and one footwell light in, have to add the passenger side still

[img]http://i297.photobucket.com/albums/mm211/butchcassidy21/P4270664.jpg[/img]

[img]http://i297.photobucket.com/albums/mm211/butchcassidy21/P4270665.jpg[/img]

[img]http://i297.photobucket.com/albums/mm211/butchcassidy21/P4270663.jpg[/img]

they arent the best pictures in the world, sorry

[img]http://farm4.static.flickr.com/3440/3306600842_7c40f0c1a8.jpg[/img]

[img]http://i252.photobucket.com/albums/hh37/Lexus2D/Mosaics/LexusSpeedo.jpg[/img]

Okay I sorted out the blue LEDs, took them all out and then back in one at a time to see what was and what was not working.

Here they are all working:

[img]http://pic50.picturetrail.com/VOL482/3191867/20414961/362799781.jpg[/img]


I picked up some Blue Neo Wedge LEDs to do the Clock and A/C controls, but I take it that by what others have posted that these are not going to work too well, is that correct? I thought the A/C controls & Clocks on the US site link looked pretty good? Are these Neo Wedge bulbs from our Ebay seller no good/too dull?

Any advice much appreciated guys.

Keith

Footwell light looks great, did you have any trouble fitting it? Also where did you mount the LED strip (assuming you have used an LED strip)?

[quote name='Parthiban' post='660923' date='Apr 29 2009, 12:28 AM']Footwell light looks great, did you have any trouble fitting it? Also where did you mount the LED strip (assuming you have used an LED strip)?[/quote]

hey thanks, no had no real trouble, thats only a temporary fix at the mo, i am going to permantly fix it tonight, ya know when you reach down and you can feel the lip, its just mounted there facing the peddles so it cant be seen, yeah i used an led strip,
what i am going to do tonight is using L brackets, stick them to the lip and then the led strip to them using double sided tap, its hard to explain but once its done will take a pic to show exactly what i mean

[quote name='ciarancassidy' post='661017' date='Apr 29 2009, 12:31 PM']hey thanks, no had no real trouble, thats only a temporary fix at the mo, i am going to permantly fix it tonight, ya know when you reach down and you can feel the lip, its just mounted there facing the peddles so it cant be seen, yeah i used an led strip,
what i am going to do tonight is using L brackets, stick them to the lip and then the led strip to them using double sided tap, its hard to explain but once its done will take a pic to show exactly what i mean[/quote]
Cheers mate, look forward to the pics

Also was it easy to figure out which wires from the ignition ring to use? And what sort of connection did you make? Do you have any pics of that too?

[quote name='Parthiban' post='661021' date='Apr 29 2009, 12:40 PM'][quote name='ciarancassidy' post='661017' date='Apr 29 2009, 12:31 PM']hey thanks, no had no real trouble, thats only a temporary fix at the mo, i am going to permantly fix it tonight, ya know when you reach down and you can feel the lip, its just mounted there facing the peddles so it cant be seen, yeah i used an led strip,
what i am going to do tonight is using L brackets, stick them to the lip and then the led strip to them using double sided tap, its hard to explain but once its done will take a pic to show exactly what i mean[/quote]
Cheers mate, look forward to the pics

Also was it easy to figure out which wires from the ignition ring to use? And what sort of connection did you make? Do you have any pics of that too?
[/quote]

its easy to see which two wires to use, as its just the ones for the buld on the ignition ring, but they are both black so it takes a bit of guessing to see which is positive and negative, i just stripped back the 2 wires and soldered the new wires on, dont have pics yet but once i wire in the passenger side will take some pics of it

ciarancassidy sounds good mate, I've had the LED strips to do this for ages but never got round to it. One thing is, that lip under the drivers side is not the same on the passengers side so may cause problems.

Don't forget to take a few pics of what you do and the connections.

Keith

[quote name='Cous3' post='661030' date='Apr 29 2009, 01:13 PM']ciarancassidy sounds good mate, I've had the LED strips to do this for ages but never got round to it. One thing is, that lip under the drivers side is not the same on the passengers side so may cause problems.

Don't forget to take a few pics of what you do and the connections.

Keith[/quote]

yeah i was looking at that, but i am hoping the L brackets will do the trick, will hopefully have it all finished by 2moro so pics will be going up then

hey here is some of the pics of what i did to wire in the passenger side, have to just take one of the led strip actually stuck up but there is pics of the brackets i used and the wiring

[img]http://i297.photobucket.com/albums/mm211/butchcassidy21/P4290666.jpg[/img]
i pulled out the heated seat buttons part and put all the wiring in the back there

[img]http://i297.photobucket.com/albums/mm211/butchcassidy21/P4290667.jpg[/img]

[img]http://i297.photobucket.com/albums/mm211/butchcassidy21/P4290668.jpg[/img]

[img]http://i297.photobucket.com/albums/mm211/butchcassidy21/P4290669.jpg[/img]
some pictures of how they are wired into the ignition barrel light

[img]http://i297.photobucket.com/albums/mm211/butchcassidy21/P4290671.jpg[/img]

[img]http://i297.photobucket.com/albums/mm211/butchcassidy21/P4290672.jpg[/img]
and that is the L brackets i used with some double sided tape i got

i just got myself a hole bunch of l.e.d's ,, i hope they will be here today but im not holding me breath as i ordered yesterday afters, i have ordered almost all the bulbs to do all the dials and centre console apart from the stereo as its not worth the bother and i intend to change it for a good doubble din at some point , im trying to find ones that are bright and wide spread that will plug and play where possible supplied in the uk and not from ebay,, im going for a compleate blue transfer..

after seeing lex2d do his/her dash and some others i just had to go for it to ,, looks awesome..

then ill do the buttons heated seats .. and the fog and head washer switch a bit laters,,

ciarancassidy, so looks like you soldered the LED wires to the Ignition live/earth wires, and extended the passenger LED wires with thicker Yellow wire to reach the Ignition (those LED strips have such thin wires). Also, the brackets are a good idea, I take it you are only fitting two each side (Driver/Passenger) and will fix something across the brackets before fixing the LED Strips in place?

Are those the Driver side brackets? How did you get on with the passenger side for fixing the brackets?

Keith

[quote name='Cous3' post='661879' date='May 2 2009, 12:45 PM']ciarancassidy, so looks like you soldered the LED wires to the Ignition live/earth wires, and extended the passenger LED wires with thicker Yellow wire to reach the Ignition (those LED strips have such thin wires). Also, the brackets are a good idea, I take it you are only fitting two each side (Driver/Passenger) and will fix something across the brackets before fixing the LED Strips in place?

Are those the Driver side brackets? How did you get on with the passenger side for fixing the brackets?

Keith[/quote]

Hey Keith

I am hoping to fit more brackets, when i went to buy them, there was only 4 in the whole shop so gotta try again this week to get more, at the moment there is nothing fitted across but it is holding the led strip perfectly, those pictures are off the passenger side, have to take some of the drivers side and also with the led strips fitted

Ciaran

hi all can any one give me a list of all bulbs needed for
1. the dials and ignition ring
2. the centre console (eg a/c rings and clock)

and is there anywhere i can get all bulbs because i really wanted to be same colour blue, im afraid if i get from different place would come out slightly different shades.
cheers all

Hi Nick

I used [url="http://www.ultimatemods.co.uk"]ultimate mods[/url] have only done this at weekend-- now they seem to be OK, could do with being a lil brighter at the centre console,,

now I used 3x T5 Capless LED bulb (286) 3 LED TYPE and 2 x T10 Capless LED bulb (501 / W5W) for the instrument cluster

for the ign ring i used 1x T5 Capless LED bulb (286) 5mm wedge bulb

for the centre console you will need Heater Wedge bulbs 3mm x2 for the clock ( I have not ordered or tried yet)

for the A/C controls you will need 3x Heater Wedge bulbs 4mm

for the buttons (heated seats trc control etc you would need Heater Wedge bulbs 3mm (i think) x5 in my car for the heated seats x2 trc control and snow x1 head light washer x1 and rear fog x1

now the button lights are not wearing any orange johnnys , so there is orange plastic in their so if you put blue bulbs in you'll end up with green lights?? this might be a modifiable job?? I've not tried yet and the clock you may end up with 2 dots from the focus of the leds so again you'll need to do work on tht i have seen about some different ways of doing this

here is some pics of the ones that i have changed look like

hope this helps you.. maybe some one has better options for you

[img]http://i176.photobucket.com/albums/w173/bens-yer/LEXUS/DSCF3288.jpg[/img]

[img]http://i176.photobucket.com/albums/w173/bens-yer/LEXUS/DSCF3285.jpg[/img]

[img]http://i176.photobucket.com/albums/w173/bens-yer/LEXUS/DSCF3282.jpg[/img]

also the centre of the buttons are very faint as of the orange pointers , but i think that is something you need to further modify which ive seen on net as a easy job

i keep thinking of other things,, not to sure if anybody else had this prob but the leds on the dash were not a great fit, slightly loose so i made sure the connections were good and put a very small dot of glue on the side so i no they wont work loose

cheers bensyer and i does look awesome i will be ordering them now, i will post pics when mine are all done.