Hello Guys, Afew weeks back I was browsing through the threads and came across someone who had added chrome strips to their radiator,
I would like to do the same to mine,problem is I can't find the site again so can anyone help me out

Cheers.SAM

is it the chrome panel that sits onto pf the radiator?

[quote name='Asi' post='701683' date='Dec 15 2009, 06:27 PM']is it the chrome panel that sits onto pf the radiator?[/quote]



Hello Asi no they are chrome strips that fit over the slats in the frot of the grill,which give the impression of a chrome grill.

There are these

[url="http://cgi.ebay.co.uk/CHROME-VENT-STRIP-KIT-LEXUS-IS-GS-LS-RX-SC-IS200-IS300_W0QQitemZ120497082529QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item1c0e2f90a1"]http://cgi.ebay.co.uk/CHROME-VENT-STRIP-KI...=item1c0e2f90a1[/url]

and this

[url="http://cgi.ebay.co.uk/98-05-Lexus-IS200-Debadged-Badgeless-Chrome-Grille_W0QQitemZ120506855446QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item1c0ec4b016"]http://cgi.ebay.co.uk/98-05-Lexus-IS200-De...=item1c0ec4b016[/url]

look chavy. thats just my opinion

[quote name='steve2006' date='Dec 15 2009, 08:48 PM' post='701702']
There are these

[url="http://cgi.ebay.co.uk/CHROME-VENT-STRIP-KIT-LEXUS-IS-GS-LS-RX-SC-IS200-IS300_W0QQitemZ120497082529QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item1c0e2f90a1"]http://cgi.ebay.co.uk/CHROME-VENT-STRIP-KI...=item1c0e2f90a1[/url]


Thanks Steve I'll give them a try

[quote name='Karateppi' date='16 December 2009 - 03:30 AM' timestamp='1260898207' post='701678']
Hello Guys, Afew weeks back I was browsing through the threads and came across someone who had added chrome strips to their radiator,
I would like to do the same to mine,problem is I can't find the site again so can anyone help me out

Cheers.SAM
[/quote]


Hi, have entered this on Aus: Toyota club site possibly not what you saw. However I used, I think it was either 9 or 11 mil: chrome pin striping, cut to size approx: can be trimmed later,line it up along the top edge and roll the extra under the bar, its been on for months and still looks like new. If your more fussy and want a more permanent job you could spray some clear coat over it to make it less susceptible to stone chips etc. Hope this helps. It certainly is a cheap mod: Cost me $12 Aus: and about half an hour or so.