hi there,
trying to get a hold of Mr Singh to ask what offset were the alloys he had on the Altezza.
I know the alloys on the back were 9.5 wide and front were 8 wide.
does anyone know the offsets?

[quote name='Mr Singh' date='22 March 2005 - 11:11 AM' timestamp='1111486263' post='222218']
Yep iForged Aeros.

8x19 fr -45mm offset
9.5x19 rr - 55mm offset

As far as i know there will be no mods required... but then again i will slam it as far as it goes... if the archs get in the way, then out with the angle grinder!
[/quote]
Found this in one of his threads........

[quote name='Mr Singh' date='18 November 2007 - 04:12 PM' timestamp='1195398754' post='486202']
[b]Chassis[/b]
Custom made 8x19" (front) and 9.5x19" (rear) iForged 3 piece wheels, Black centers with polished lips.
Wheel spacers (13mm front, 17mm rear)
[/quote]
Also this so it seems it needed spacers.......