Pinewood

Thanks for all the replys guys i will do that.

The trouble is i dont want to drive the car as it feels very dangerous

About 3 months ago i changed my track rod arms/ends on both sides & then carried out a steering geometry. Since then i have had a problem with the car pulling left and right when driving along so much it has become dangerous to drive. I have had 3 steering geo's done and after a week of them being done it starts pulling left and right again. Can anyone shed any light on this as the car has become an expensive ornament in my garage? :tsktsk:

This car is getting stranger by the minute. I have changed the relay and still the same. I am going to take it to a Lexus dealer but has anyone in the south east used a lexus dealer that has found the cue to this?

Yeah i was planning on changing the relay but Lexus want stupid money for it. Has anyone got a spare one that i could purchase?

So has anyone found a definite problem for the lights staying on?

Hi ya guys me again, i have done as you said and i have had the car running for about 30 min the heater is hot and hasnt overheated. The only question i have is the pipe at the bottom of the rad is still cold! is this suppose to hot like the top one?

Thanks guy i will give it a go.

Hi The trouble is i have no coolant in it and the nearest hill is quite a way from here. Can you bleed it with the heaters on, and on a flat surface?

Hi ya guys, i have just changed the radiator on my IS200. I now need to fill the coolant system & bleed can someone talk me through the process?

Hi ya Guys, Just wondering if anyone has any IS200 parts in Granite Sky? My car is looking a bit tatty so looking to get some bits for it. PM me if you do Thanks

Hi ya everyone, Just wondered if anyone had a Radiator that they wanted to get rid of. Mine has sprung a leak and the car is off the road so need to get it sorted as soon as possible. Let me know Thanks Si

Hi ya, I have been looking through ebay to find a radiator how comes there are so many different versions and what is the best one to go for?

Well i have a problem with the throttle, that when change gear the revs stick at about 3500 RPM. I have cleaned it out and while cleaning it noticed that when i turn the valve to open the throttle the spring on the inner section starts rattling around. I dont know what else it could be.