Astrix

I still think you are better off saving £30 or so and spending it on somthing that will make a difference as its so easy to do and most after market units have a brain that will be in the boot with a cable that runs to the front of the car, even it hasn't you will still save some time as a two year old could work it out. if some help is needed pm me with a contact no: and i will be happy to run you through it or if you are in bristol or near to I will even help you. Good luck :winky:

Well due to little knowledge the first one has not worked out to well mainly because I had the wrong tool to get the air out from the different layers so waiting for the right one to arrive and some time to try again. Will post again when I have gotten on with it

Hi I am running the stock speakers in my IS200 with no probs. it is verry easy to rewire the speakers and head unit as this is what I have done at this point and I have no amp running. If you need some help or info on the correct pins in the factory loom feel free to PM me and I can let you know. If you have sat nav I wont know the right wires and then you may need the by pass lead. Any Q's let me know

I have made a dash mount for my Tomtom with the cable out of site. Can give you info if you want it pm me Its not the best finnish as its the first one I have made and thinking of making another

Been looking for some time now and thats why I am now making my own. Have completed two layers on the rear pannel and now starting the face pannel. I will post some pics soon

Well i have now put in my new head unit and could not find a plug to do the job, well that I could get ASAP ( Im a little impatient you see). So I removed the lugs from the plugs and used heat shrink to bind them togeather and protect them from shorting until I replace all the speakers and wiring. It works a treat and sounds great. Also I have started to fiberglass the boot pannel and it seems to be easer to use sticky plastic to line the pannel and fb stright onto that as I tried the expanding foam and got a dud can I think as I ended up with a pile of muck in boot :tsktsk:. I have started fb in sections on the pannel will let you all know how it goes tomorrow after the first layer has gone off. DJ Wozza thanks as i haddent though of the weight issue you may have saved me from distruction or my box at lest thanks

I will be using the expanding foam to make a mold as that seems to be easyer and not to much work going on in the boot. That said if my mould holds up it could be of some use to you if you want it. I go to crawley from time to time so you maybe able to get them from there if you want them?? let me know (if they are in piece) Also I am thinking of only using MDF for the mounting of the speakers and chicken wire to form the face of the box as this is more flexable to use in the small space.

Check out the link from Mr.Singh as it will deal with that using water just dont forget to add the displacement of the woofer to the volume. Rember that due to the small space I am only putting ten inch woofers in.

Wow great link thanks Mr.Singh and thanks for the foam idea DJWozza and for the info Corsavandal. Well with all the help I have receved from this site I have now joined gold Thanks to you all. As for the sub box Ill keep you all posted with some pics and I hope not to many probs. I was going to start it today but i dont have enough ressin to get far so will start next week when i get the ressin. Started to fit my new head unit today but not to sure were to put the Brain?? It came with enough cable to just leave it at home any Ideas? or try to find some room in the boot with the two amps, EQ, New brain, sat nav, free vew, disk changer and the list goes on Thanks

I have added some RCA plugs to the stock amp and its not that hard to do realy and sounds ok for now. I will be making up an adapter for my new head unit to fit the stock wiring loom and was wondering if others are still wanting them??? I may be able to make some more if interested pm me Ps Im making it for a IS200 SE 02 just got to find the correct plug :D

Any one know what bdy kit it has ??? as Im looking for one at the mo

you mean the gold membership? you can get 20% off part's at your local Lexus, you can list items for sale on here, you get a cool card and tea mat. plus access to the gold members area. Not much difference in honesty, but it's a great way to support the site!! :) Intresting thanks

Just had a look at mine can only see Black/Brown spot and Red/Black spot on the base speaker cant see the tweeter sry I will have mine out in the next week or so can let you know then

yes the bulk of the box will be at the bottom on the floor so it will not be a prob I hope. Whats the dif with gold