Do Not Sell My Personal Information Jump to content


paul's is200

Members
  • Posts

    29
  • Joined

  • Last visited

Profile Information

  • Gender
    Male
  • Lexus Model
    IS200 SE SPORT

paul's is200's Achievements

Explorer

Explorer (4/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. Happy Birthday paul's is200!

  2. hi, i think that the high revs is prob due to the clutch slipping, the biting point and poor gear change also comes down to the clutch. this was the same on mine and i had the clutch replaced and was a different car all together
  3. hi can anyone advise me how to free off a sticky caliper, thanks
  4. thanks , any ideas on what i can do to check it ?
  5. hi i have recently had fitted a new set of discs and pads allround, when the wheel gets hot there is a metallic noise coming from the o/s/f . it was worse yeaterday so when i got home i had a cup of tea then went to have a look to see if i could see anything that could be making the noise. i couldn't see anything untoward so i checked the discs and the o/s/f disc was hot to touch when the others were ok. the noise seems to be there all the time and increases with speed of the car. it only stops when the car is coming to a stop ? any ideas would be greatful, thanks
  6. thanks , thats it saved me alot of time tomorrow trying to figure out how to get it off.
  7. hi i have a is200 sport , i need to remove the grill at the bottom of the front bumper. any ideas ?
  8. if you remove the wheel then the centre cap pushes out from behind, good luck with you alloys i done mine last month and looks 100% better even though i haven't done it b4
  9. hi, i have a noise coming from the n/s/f wheel area when the brakes/wheel gets hot. it happens all the time and have traced it down to this wheel. it sounds like a scraping noise all the brakes have been checked and there is nothing binding or rubbing on the disc. it seems to start at approx 20mph and keeps going until the car comes to a standstill, using the brakes also doesn't make it stop. any ideas ?
  10. from last night my remote wont work outside my house, but will if i drive round the corner or anywhere else. any ideas ?
  11. i am doing mine at the moment and only have 1 wheel with major kurb damage so am going to use unibond metal filler from screwfix . i am going to give them a few coats and a clear laquer
×
×
  • Create New...