GOLO

Had to source a backplate for my GS300 1999, could not find any, had to order from a company in Japan. It was £177.78 inc PP, the only thing was it is costing me £58 for import duties.

Thanks Steve, same thing happened to my GS300 1999, tried the trick and it worked.

Its just arrived and I gave it a quick test, it does access the abs unit and you can bleed the brakes. Hurrah!!!

Hi, I have the Autel MaxiDiag Elite MD802 and I have just bought the Maxicheck Pro which is meant to bleed the abs brakes. When it arrives I will post the results of the test. The 802 cost £160 and the Maxicheck cost me £140, well worth it.

I have an Autel and it does read my GS300 1999 so give it a try.

I was going to respray the front of my GS300 but you have inspired my to try this!

Hi, same engine but i have a K&N filter and no problems!

Thats what stopped the knocking on mine! Also took the opportunity to to replace them with poly type bushes.

When you pull the washer out there is a flat spring clip you need to pull up! its there believe me. I have just taken a picture of mine its attached.My finger is pointing to it.

I have just replaced my headlights and I can say the four nuts you get to after pulling back the wheel arch mud guards are not easy to get to. I saw this video on utube but it doesnt show the washer removal, they just pull towards you then you spring the clip out, you can't miss it, very easy.

Yes the bumper needs to come off, the washer pulls forward on a spring then unclips.

It's also no longer available!

I have to agree with TigerFish, mine lasts well over a year.

Hi Mine just pulls off!

Seems to have gone!