PatrickM

Nice wheels. Can i ask you, is that spoiler from lexus? i mean an oem part? I just bought a GS300 and i am looking for a spoiler :)

I just did a service on an LS400 the other day with 548.000km(340.000Miles) on it, and i didnt do anything besides change the oil and grease the brakes. The IS200 i have seen with the most Km on it, is a 99' with 396.000km(245.000Miles) I changed the oilpan on it because it was starting to rust and oil was dripping from it.

The Fan starts because you have the A/C on :) So the fan pulls air through the A/C Condensor. If you turn off your A/C the fan will not turn on :)

Someone before you have had the gearstick pulled out and then put it in wrong again. The Is200 shifter has an angle to it. So if you have had it pulled out and then put back in the wrong way, well then that is your problem :)

http://l-tunedparts.com/product/?id=2401 $402 So aprox £250 And it is brand new with everything you need for fitment.

As long as he puts a Headgasket on, in the right thickness i dont see why it would change anything skimming the head.

Alot! :P I have a coilover suspension. I think it is about 60-70mm on this image. I have had it all the way down on the coilovers and on stock 17" Lexus rims, it was scraping the buttom on even small speedbumps. It was LOW! :P Think that would be about a 100mm lowering maybe more. :)

My Is200 Sport with TTE skirts, sitting on 18"Rota GTR rims.

You must have gotten an out of balance Flywheel, It shouldnt do that. I know that we actually put single mass flywheels on cars with Dual mass stock. We do it because people are complaining of clutch judder. We do this on a few Toyota models and that is of the advice of Toyota.

I work at Toyota/Lexus here in Denmark and i got the judder problem. I asked for a price on a new flywheel. The price was £830 and that is the price i get it at, working at Lexus. So if a costumer walked in it would be £1300. :S

Sounds a bit drastic? Nah. I think this would be the best way to fix it :) You are just gonna weld the 2 moving parts of the flywheel together, and make it a solid mass flywheel :) In theory it should work.

Have anyone had luck with welding the flywheel together?

Yea, it isnt my taste either. But put them under the doors or in the trunk for extra lighting :)

I run 18" and i have mine dropped about 80mm(Yes, it is pretty low), i only get rubbing on full steering lock, againsts the chassis. I have my arches rolled and pulled out abit. So dont know if you are gonna rub there. But yes, you would be able to drop it 30mm without problems.

Then go to your local Lexus dealer and get them to order the part.