Do Not Sell My Personal Information Jump to content


Electric Windows


Recommended Posts

The Battery on my GS300 went flat due to side/parking lights being left on inadvertently over a period of 3 days.

This has resulted in the blocking of the electric window operation on all but the driver's window.

I understand that this requires a "re-set" to re-enable the passenger and rear windows to operate.

Does anybody know the process of performing this "re-set" ?

Peter

Link to comment
Share on other sites


This is my "How to" from the 250 section

May well work on yours too

When you change the Battery you MUST re-initialize each window in order to be able to control each from the drivers door switches.

In order to do this you perform this operation at each window using the switch on the door for the window you are at. If you look closely at the small LED on each switch you will se it is blinking - this indicates the windows need initializing.

1. Open the window halfway using the door switch.
2. Fully close the window by pulling the switch and continue to hold the switch up for 4 seconds or so.
3. Do this at each door.

When complete the blinking will change to being a constant glow ie 'on'.
Your windows will now fully function again from the driver's door control set.

Hope it works

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...