Gs450H Rear Hub Removal 2007

[carnut1980]

hi all, i need to change a rear wheel bearing, i have bought a new hub.

I can get everything off except the old hub, there are 4 bolts to the rear, where the driveshaft goes in (RWD). I can't seem to get a 17mm socket back there, let alone get the space for a wrench. It seems the driveshaft itself is in the way.

I even have bought the hub pullers, once i can get these 4 nuts off.

Please help!

[steve2006]

From what I know you need to remove the drive shaft from the hub by disconnecting the shaft at the differential flange joint then remove the centre domed cap on the hub,remove the cotter pin, cage washer and securing nut then tap out the drive shaft with a copper mallet.