Do Not Sell My Personal Information Jump to content


Noise after replacing timing and drive belts


Harrysmate
 Share

Recommended Posts

need a bit of help and advice please!

I just replaced the timing belt and all the drive belts on my is200 (never done it before), everything went okay but I now have a squeel when engine is idling. The noise seems to disappear at higher revs. Could it be the water pump which wasn't noisy before or is it possible that I have the wrong tension on the drive belt, and if so how do I check it?

Any advice would be appreciated - Thanks

alos posted this on my status - got confused!

Link to comment
Share on other sites

  • 5 years later...

On 4/1/2016 at 4:04 PM, Harrysmate said:

need a bit of help and advice please!

I just replaced the timing belt and all the drive belts on my is200 (never done it before), everything went okay but I now have a squeel when engine is idling. The noise seems to disappear at higher revs. Could it be the water pump which wasn't noisy before or is it possible that I have the wrong tension on the drive belt, and if so how do I check it?

Any advice would be appreciated - Thanks

alos posted this on my status - got confused!

Hello did you found out what it was? Cause I’m experiencing the same problem on my IS200

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...