Diy induction

[Si_is200]

There's a lot of debate about induction kits, panel filters, how much power the gain and loose etc..... that discussion belongs somewhere else though  

I've been wanting to build up a induction kit for a while but as you all know there's not all that much available and It's a rather expensive placebo... So anywhere here's mine fitted obviously it now has clamps on the hoses and a breather filter fitted... If anyone wants measurements or links to the parts just drop me a pm or a can help them build one up, I will be fitting my old Bmc cda later to keep things a bit cooler though.... 

[jomo]

I'd fit one of these in a heartbeat regardless if they make or lose you power, the only reason i haven't is that the  GXE10 engine is ugly as sin without the plastic covers.

 

 

 

[Gldnandy]

I am in the process of making one for my IS 300. got to finish the custom MAF holder then i can get fitting it. what would/do you use for pipe supports/clamps?

[Si_is200]

Plus one on the 1gfe not being pretty without its cover! Luckily with reliability don't need to open the bonnet that much though 😜

 

As for clamps / brackets I used an old metal support off my impreza, you'rs will be different layout but should be fairly easy to design you're own support bracket 

[Gldnandy]

Going to get started tomorrow. going to make new ali brackets and a new custom ali airbox. wish me luck

[Si_is200]

Good luck and get some pictures up after you're done ! 

[Gldnandy]

Have just posted a thread. didnt want to hijack this one.