Do Not Sell My Personal Information Jump to content


Recommended Posts

Simple question are there any problems fitting a set of RX300 wheels on a RX400h, both sets of wheels look near identical but just because they look the same doesn't mean that they are :-(.

Link to comment
Share on other sites


Hi,

Having cross referenced both models on Toyodiy they are interchangeable.

There are 2 sizes 17" x 6.5J and 18 x 7J, both are five stud with a PCD of 114.3 and the same offset and bore (60.1).

So yes you can fit them as a straight swop. :biggrin:

  • Like 1
Link to comment
Share on other sites

19 hours ago, steve2006 said:

Hi,

Having cross referenced both models on Toyodiy they are interchangeable.

There are 2 sizes 17" x 6.5J and 18 x 7J, both are five stud with a PCD of 114.3 and the same offset and bore (60.1).

So yes you can fit them as a straight swop. :biggrin:

Thanks for that and the reference to Toyodiy some interesting reading there.

Rgds Tony

Link to comment
Share on other sites

  • 2 weeks later...

No idea if this is apocryphal or true but I recall some discussion about this elsewhere, the main thrust of the discussion was that 400h wheels were stronger than other models (or aftermarket wheels) due to the immediate torque of the electric motors, thus the recommendation was to stick to 400h specific wheels. No idea if this was just 'internet BS' or not but might be worth a dig into.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...