• ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoticons maximum are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Liso
      Hi.. I have a 2002 Lexus IS200 Auto, I am having a transmission problem. At first I thought it was caused by my ABS sensor, my ABS light on and TRC OFF  flicking, which when diagnosed it was front right side. After replacing that sensor the transmission was working fine for two days but started doing its thing again. The car will just refuse to change from 1or 2 untill it redlines, if it does change to another gear it will be just for a second or so and back down. Some days it will drive smooth for two hours or so and if you going slow there is a slight jerk as if the car is changing up and down.
    • By Blucky
      I have a 1999 Toyota Altezza 1GFE, which recently has had the engine light come on after driving it for a few minutes. Every time i restart the car it goes away but comes on again after a few minutes.
      I have done the paperclip diagnosis on the ODB1 port, but all it does is make the engine light, ABS light and the ECT light flash continuously.
      Does anyone know what it might be?
       
      Cheers,
    • By mondo35
      Hi guys, i have owened 3 lexus is 200s 
      and I absolutely love them, 
      just recently i thought about having a caravan so i sold the sport and got the is 200 SE 
      I have the tow bar and everything, i want to know how much the standard is 200 weighs.
      as my car and caravan must be 3.5 tonne or under. Now can anybody please tell me how to find this out, i have looked online allready but have had no luck
      thanks in advance for all the replys, 
      much appreciated 
    • By Yobosoku
      Hi, new to forum, there may be an already existing thread but I cannot find anything......ANYWHERE! I need an ecu pinout for a 2001 is200 using a 1gfe with an ecu number 89661-53200. I need this pinout diagram and expertese to fit a bee*r limiter basically because I want one and I like being a loon in my car. There are people who hate/disagree with them, however I would like one in my car and I would appreciate help fitting it.
       
      any help appreciated.
    • By wezsleigh
      Hello im looking to get install a turbo into and IS200 and looking through this forum and various other forums I've not really found a clear answer to my question. Can you just install a turbo onto the is200 without having to buy this £2300 kit? For example, could I just change the manifold and install a turbo without having to spend all that money. I understand that some stock internals may need to be upgraded however e.g. flywheel, manifold and such.