Recommended Posts

I require a replacement ABS Brake Booster Module for my 1998 GS300.

the original part number for the module was 47210-30160 but this was superseded by 47050-30160

Can anyone recommend where I can purchase a refurbished module?

Many Thanks

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

    • By ultimatequinoxe
      So to my amazement my late 2000 (T3?) GS300 passed the MOT with its very aged and knackered exhaust. Two advisories, webbing of a seat belt and "oil leak pinion rear diff". So two questions if I may for your thoughts, experience and knowledge :) 
      1. Theres no Diff whine, and though wet, I'm not getting any drips. And to be honest I've not had a leaky diff on any car before. Is this common? Tough to fix? Indicative of anything major (other than the diff running dry of course)? (cars just coming up to 150k miles)
      2. Exhausts. How much difference to the sound do the "resonators" and maybe third cat make internally? I don't want to lose back pressure anyway, but I see/read that people who have fitted stainless steel systems without the "resonators" on the middle/Y-pipe are getting a lot of drone inside. What needs to stay in some fashion to keep the internal noise level as close to stock as possible?
      I ask because I still want to replace the system from the front to the back (not the manifold and 2 front cats though, they're okay). Standard systems used are £300+, third party new totals around £400 or so. Stainless steeel fitted new, cheapest quote so far is £390 (I've had loads of quotes). However, thats almost certainly without the resonators/mufflers on the Y pipe.
      Last option and most likely one is some shiney tail pipes from the USA (those plus shipping works out cheaper than UK fitted ones). All I want is a healthy system in the middle (third cat/front pipe and middle Y-piece) and shiney non-OTT tail pipes that just give a little more external tune for the lovely 2JZ. Seeing as standard rear boxes are pushing on £200 a piece new, I can get a pair of stainless steel ones for about £280, or for £340'ish I can get a Manzo cat back (Y-piece and rear boxes) however the Y-piece has no "resonators" and tempting as it looks, I fear a terrible noise inside and possibly a drop in back pressure I'd rather not have.
      Sorry for the waffle, but the whole picture might save some guess work for you :)
      (Images of a standard system and a Manzo cat back for reference about what I am waffling on about)


    • By Slucky
      Hi,
      Could anyone recommend a good brake caliper painting service in London, as my wheel hubs are really rusty now. 
      Or if anyone in the forum who does this service. And what would be the cost for 4 wheels. I found a few but they were not located in London.
      Cheers
    • By Chazz
      So, I'm shiny brand new into Lexus ownership with my 1997 LS400.
      I'm looking for stainless steel braided brake lines to replace the crusty rubber ones currently fitted. I see a lot for 89-92, and then 92-95, but none in the UK that will apparently fit my 97. 
      I'm not interested in getting bent over at Toyota for rubber hoses (previously I owned a Landcruiser - I'm acutely aware that OEM stuff is pricey). 
      Where can I get stainless steel braided hoses in the UK, for my 1997 LS400? 
      Thanks all.
       

    • By ultimatequinoxe
      Hi all!
       Having had my latest GS300 for a couple of months now, the MOT is due and I know the current exhaust is an issue (see pics).
      I have been desperately hunting for a stainless steel system in preference to an OEM seeing that the two used ones on eBay are a mighty £350! And MIJ have quoted me £445 for new S/S with life time warranty (as an FYI).
      So the questions are:
      1. If I plug that hole in the back box, and make sure that and the awful paste all over the joint isn't leaking either (thats how I bought the car, not my handy work I'll add) might I stand a chance I wonder, as technically the fail is excessive corrosion. But I fear all that putty is an obvious giveaway of excessive corrosion even if its not leaking.
      2. Another MOT requirement seems to be the correct number of baffles/mufflers, so should one slap a S/S cat back on would it be an issue. Or should I maybe say has anyone taken there car (any car) in for an MOT with a S/S cat back and had any issues other than possible noise or emissions?
       
      Many thanks! I am getting a little frustrated that in the last two months I've not found a single second hand S/S system and I'm not really wanting to throw to much on the car just yet until I've had it a while longer.

    • By Ibbo
      I require a replacement ABS Brake Booster Module for my 1998 GS300.
      the original part number for the module was 47210-30160 but this was superseded by 47050-30160
      Can anyone recommend where I can purchase a refurbished module?
      Many Thanks