Is200tt Soon Back In Business...

[SpOcK]

Sami,

Car's looking sweet. Nice figures you're getting from the dyno. Kinda makes up from all the crap you had at the start. As for the MOT, is there any way the ECU can be temporarily be remapped to limit the power or is that not possible?

Keith

Yeah, it seems that my luck has finally had a turn for the better... :winky:

The top figure I now have is too much for the Finnish MOT (engine is allowed to have only +20% power to the most powerful model of its model series, IS300 in this case), so I had to de-tune it down to ~250hp by using only ~0.25bar boost and overly retarded spark... (which still is quite an impressive figure, IMHO)

Std ECU cannot be remapped in any way, but by disengaging the boost controller the turbos run only against the mechanical actuators(?) which have lower give-in pressure, and by retarding the spark with eManage, the de-tune can be achieved.

[SpOcK]

Some nice figures there Sami, congrats mate well done :D

Thanks Mate! Not looking bad at all for yourself, either! :D

Next stop is to come after you...

It's just that my current turbos are only rated for ~180hp/pc. But then again, barriers are meant to be broken! Aren't they?

[RoadRash]

WOW!

Holy Cow..... that's indeed impressive!!

Are you going to come to JAE?

I think I can't make it to JAE, as my vacation is not until August...

:P JAE is in JULY!!!! :P

So you have to COME!!! :D

[SpOcK]

WOW!

Holy Cow..... that's indeed impressive!!

Are you going to come to JAE?

I think I can't make it to JAE, as my vacation is not until August...

:P JAE is in JULY!!!! :P

So you have to COME!!! :D

JAE being in July is the reason I cannot make it. If it was in August during my vacation, I could probably make it then. It's quite a drive from Finland, so it's not just a case of "drop-by" for a weekend...