Do Not Sell My Personal Information Jump to content


Led Lighting Group Buy


Mr Morse
 Share

Recommended Posts

Several members have contacted me to request LED products......

In order to keep the costs down (shipping is the killer) I'll need a minimum of 10 orders (a pair of bulbs counts as 1).

I only supply the best quality products available and many LOC members have already PM'd me so say how pleased they are with these products.

I can provide:

- Rear pulsing brake bulbs

- LED front & rear indicators

- LED dual parking lights/indicators

- Load resistors (required for LED indicators and Pulse brake lamps)

- Sidelights

- Door marker kits

- Interior bulbs

- Strobe kits & LED undercar strips

- Lots more...ask me for specific details

For the guys who have already PM'd me with requests, please post up here so that i can comply with the terms and conditions of the site.

Thank you everyone for your interest.

Mike

Orders:

Sparkystav 1 x 31mm blue dome

Bulldog 1 x 31mm blue dome, 1 pair 7440 blue reversing bulbs

Bluenose 1 x BA9 blue maplight, 1 x 31mm blue dome

Kazi 1 x blue 501

Rogue 1 x BA9 blue maplight, 1 x 31mm blue dome

Niraj 1 x 31mm blue dome, 1 x BA9 blue maplight, 1 x Blue Pair of Sunvisor bulbs (to confirm which type)

Pixie1972 Awaiting your confirmation

Edited by Mr Morse
Link to comment
Share on other sites

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Mike can i have the set of interior ones i have PM'd u about.

Also are the reversing ones an easy job ??? or they a pain in the butt ??

Hmmm what colour for interior ??? bright white or Blue ???

HELP PLZ GUYS

Link to comment
Share on other sites

S**t i forgot to say what colour i wanted.

Blue please Mike for me.

Bulldog; Blue IS, go for Blue interior light. Or for something completely different. You can get UV LED's. Don't know how good they are or even if Mike can get them, but its something different. I thought about doing my whole dash in them but played it safe in the end.

I just need that to finish mine off. Done the dash, and A/c, Radios blue, Got Blue door markers, just need the interior light to finish the job.

Link to comment
Share on other sites


Mike

Firstly sorry, because I suspect I have asked you this already but which items on the list are plug n play :

- Rear pulsing brake bulbs

- LED front & rear indicators

- LED dual parking lights/indicators

- Sidelights

- Door marker kits - already fitted and 1st class thanks again

- Interior bulbs already fitted and 1st class thanks again

Thanks Very Much, also can you let me know the prices

Regards

Chris

Link to comment
Share on other sites

Mike

Firstly sorry, because I suspect I have asked you this already but which items on the list are plug n play :

- Rear pulsing brake bulbs

Plug and play, just need to install load resistors.

- LED front & rear indicators

Plug and play, just need to install load resistors.

- LED dual parking lights/indicators

Plug and play, unsure about load resistors, wouldn't have thought so though.

- Sidelights

Plug and play, 2 min job.

Link to comment
Share on other sites

Lee...

The combined indicators/sidelights require a bit more work than that. IT'S NOT A PLUG N PLAY :excl:

- Remove the light housings and trash the orange reflector

- Source a pair of 7443 dual filament bulb holders (from a scrappies...they are a generic Mr T type)

- Cut off the existing single filament bulb holder

- Splice in the live feed from the sidelight to the dual filament bulb holder

- Splice in the load resistors across the green and white/black wires

But still a well worthwhile mod! :D

Link to comment
Share on other sites

Lee...

The combined indicators/sidelights require a bit more work than that. IT'S NOT A PLUG N PLAY :excl:

- Remove the light housings and trash the orange reflector

- Source a pair of 7443 dual filament bulb holders (from a scrappies...they are a generic Mr T type)

- Cut off the existing single filament bulb holder

- Splice in the live feed from the sidelight to the dual filament bulb holder

- Splice in the load resistors across the green and white/black wires

But still a well worthwhile mod! :D

Ah rite, I thought they were the ones that go where the sidelights are and the flash with the indicators.

I get which ones you mean now.

Link to comment
Share on other sites

Yo Mike,

Can I get some blue sidelights, indicators front and rear (and side?) and blue reversing LED. And all the interior lights in blue too.

Did you send out my Clear repeater lenses?? I not seen or heard anything of them.

S.

PS. ok, so this should really be in a P.M. :tomato:

Link to comment
Share on other sites

Can I get some blue sidelights, indicators front and rear (and side?) and blue reversing led. And all the interior lights in blue too.

Did you send out my Clear repeater lenses?? I not seen or heard anything of them.

PM'd you

Apologies for the non-arrival of the door marker kit, I'll order up another one for you.

Link to comment
Share on other sites


Mr Morse

Any resistors left need two

Sorry...nothing available. Will take a week before I have them?

Can i have two off you

Want to resolve the light on the dash staying on

Should have a couple for Monday, I'll PM you when they turn up

Link to comment
Share on other sites

  • 2 weeks later...

OK....Group buy is now closed

I'll get around to PMing everyone tomorrow with payment details and as soon as everyone has paid up, the order will go in. Don't expect to have these delivered to you before start of January, but as usual I'll do my best to get everything out as soon as I have it with me.

Thanks to everyone who has participated! :D

Link to comment
Share on other sites

i am still having trouble

the light on the dash only comes on and stays on when the brakes are pressed

Any help

Across which colour wires do you have the load resistors conected?

green & white/black wires

will get a picture 2morrow

Is this for the LED brake lights?

This is how mine are wired and work fine.

LR.jpgClick to enlarge

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




×
×
  • Create New...