Do Not Sell My Personal Information Jump to content


Dyno Results Of My 2Is - Good Or Bad ?


turmoll
 Share

Recommended Posts

Hello,

I put my 2IS on the dyno. These are the results:

my 2IS:

Power: 197,5 HP(M) @ 6310 rpm
Torque: 246Nm @ 3766 rpm
Milage 106 000 km
Temperature 28 C
series (expected):
Power: 207 HP(M) @ 6400 rpm
Torque 250 Nm @ 4800 rpm
Seems I lost 10 HP(M).
We do not have much 2IS in Polish forum to compare results so I want your opinion.,
hamownia_is250.jpg
Thx,
turmoll
Link to comment
Share on other sites


10hp isnt that much of a varience. Could has been the rollers. Car may be due a service. Climate control may have been on. Not high enough Ron fuel used. If it was 15hp or upwards id be looking for issues. If you get all the above done and do on a cool day it may get closer to stock figures.

  • Like 1
Link to comment
Share on other sites

10hp isnt that much of a varience. Could has been the rollers. Car may be due a service. Climate control may have been on. Not high enough Ron fuel used. If it was 15hp or upwards id be looking for issues. If you get all the above done and do on a cool day it may get closer to stock figures.

Previously I owned Vectra C Z19DTH 150 HP (M). I put it on two different rollers (including the one I was with 2IS) and I got 153 and 154 HP(M) . So I assume this roller is pretty reliable.

Climate control was off.

Car was at 104 k km in the service, however it was not 'full-service' but 'half/in-beetween full service' and air filter was not changed.

Fuel was ordinary 95 Unleaded.

I think I will try in cooler day, with 98 petrol and/or Shell V-Power Nitro+ after air filter changed on the same dyno.

/turmoll

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...