AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.

Sign in to follow this  

What You Need For Fog To Brake And Light/brake/fog And Cost


what you need and a link on how too

1) conversion 1 fog to brake you will need.

  • small roll of red wire(as you'll be taking a live from the brake live) no more than £5.00
  • some red tube connectors no more than £2.00
  • some scotch locks no more than £2.00
  • 2xp600a diodes from maplans or electrical shop 65p each
  • a roll of electrical tape(no other tape will do ie masking tape duck tape etc) no more than £1.50

2) conversion 2 light/fog/brake

  • all of the above(but you have already got it so don't buy more lol)
  • some cable ties no more than £2.00

now for the expensive part.i was lucky i found some is200 in the scrappys so i paid next to nothing for bulb holders but if you cant find any at the scrappys you'll need to go to lexus

  • bulb holders from scrappys £5.00 the pair.
  • bulb holders from lexus approx £20.00 each poss more.

the whole conversion cost me £6.30 i'm in the trade and had all the wire i needed at work also i didn't

use scotch locks i soldered my wiring and used heat shrink instead of tape were i'd soldered(i don't like scotch locks but its a personal choice)

hope this helps all who asked on my light/brake/fog mod post

FogBrake Rear light mod.pdf

 Report this tutorial


There are no comments to display.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now