Do Not Sell My Personal Information Jump to content


IS200 Airbag Removal & Part 1 of Steering Wheel Removal

Lexus Owners Club
 Share

Description

IS200 Airbag Removal & Part 1 of Steering Wheel Removal

Workshop disclaimer applies!

DISCONNECT THE BATTERY NEG - TERMINAL

STEERING WHEEL PAD

NOTICE:

If the airbag connector is disconnected with the ignition switch at ON or ACC faults will be recorded on the ECU

(1) Place the front wheels facing straight ahead.

(2) Using a TORX© socket wrench, loosen the 2 TORX© screws untill the groove along the screw circumfrence catches on the screw case.

(3) Pull out the wheel pad from the steering wheel and disconnect the airbag sensor

CAUTION: When storing the wheel pad, keep the upper surface of the pad facing upward.

never dis-assemble the wheel pad

NOTICE:

When removing the wheel pad, take care not to pull the airbag wire harnes.

Thanks to Mat Clawley for this guide!

 Share

User Feedback

Recommended Comments

ax53

To everyone who has problems getting the torx bolts out. Here's the secret trick to how to do it.

They are being pushed in by the plastic casing so it's just a matter of prying the plastic out so the bolts can fall out of the bracket.

 

 

trick.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a Comment

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
×
  • Create New...