AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Sign in to follow this  

Ls430 Brake Bleeding


Description

How to bleed your LS brakes.

NOTE: Do not let brake fluid remain on painted surfaces. Wash it off immediately

This is a 2 person operation

(1) Fill reservoir with brake fluid to specification:

SAE J1703 or FMVSS No. 116 DOT3

(2) Connect the Bleed tube to the caliper(nipple)

(3) Depress the brake pedal several times, then loosen the bleed nipple with the pedal held down.

(4) At the point that fluid stops coming out, tighten the bleed nipple, then release the brake pedal

(5) Repeat 3 + 4 untill all the air in the fluid has been bled out

REPEAT THE PROCEDURE FOR ALL BRAKE LINES AT EACH WHEEL

Torque: 11N .m (110 Kgf.cm, 8 Ft.lbf)


 Report this tutorial


0 Comments

There are no comments to display.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now