AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.

Sign in to follow this  

Buying an IS300: What to look out for


Buying an IS300: What to look out for when purchasing a Lexus IS300

This is a list of things to check when viewing an IS300. If you are unsure about checking these items it is recommended that you get an independent inspection carried out.

  • Ball joints – Perform full lock turns and try to drive over speed bumps and listen out of a knocking noise or loose steering feel.
  • Alloy wheels – 17” wheels are prone to corrosion. If the car is within the 3 year manufacturers warranty they can be replaced. Otherwise except to pay £40-50 per wheel for refurbishment or look on eBay as there as many sets of IS wheels now appearing there.
  • Stone chips – Take a good look at the bonnet and front bumper as stone chips are common.
  • Ignition lock – Insert the key into the ignition, turn on, turn off and remove the key. Repeat this a few times. Any sticking may indicate a problem with the ignition barrel (Note that the key needs to be pushed in when turning from ACC to OFF). Cost is around £80 for a new barrel.
  • Folding mirrors – Open and close the mirrors a few times. If a mirror sticks it is normally nothing more than dirt which can be cleaned with soapy water and a quick squirt of WD-40.

Thanks to Colin Barber for this Guide!

 Report this tutorial


There are no comments to display.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now