Front Wheels Griding Help Please

[Tomasz]

Hello guys I just got nice Lexus is200 sport👍 but the problem now is that front wheels grinding when at the speed ,a lot right more then left,corner side driver dashbord shakes.....but I did read all topicks about the breaks etc. I took wheels off inspected. I'm good with cars,but can't find fault as checked breaks (didn't removed to inspected) as when I turn wheel its moves easily but u can hear grinding litlle from pads,then I found that's brake disc have play on hub wheel holding bolts?... There is no bolts holding discs to hub? Checked pictures on Internet it seems to be that's normal?..so now I lost my clues,did is possible that grinding still comes from breake calipers there are new but used....rear bolts are rusty so this might be problem.....I do have good breaks,when I turn steering wheels when drive in left or right it's feel like not grinding as Mach feels more smooth......can u help me as I can't find folt with is....I Olso checked plates be hind discs they do not touch discs.......I have wear tires in side edges I booked for Wedsday all chassis alignment can be wheel.bearings?????

[steve2006]

Sounds like wheel bearings, remove brake pads then spin the wheels and listen for roughness,if you touch the coil spring and spin the wheel you should be able to feel the vibration.

Try and wobble the wheel top to botom and side to side with it off the ground to check for bearing play.

[Tomasz]

Hello thank you for yors help I did checked wheel when I had car of the ground....and it wobble up and down and sides and it didn't felt right ,wheel turns smoothly and u can hire brake pad grind only litlle,but then I never had problems with wheel bearings so don't now about haw Mach play wheel would have if any,I thing should be solid no play at all? Do u now guys haw Mach might cost to do it at garage as I can't do it my self u need puller etc.i mean I'm good at this but have only street no garage......I'm from Somerset Ilminster any body now about good garrage?

[r3dd3v1l]

sounds like you ball joints could need changing as well?

[Tomasz]

Thanks for all help,I do have a bit cracked gums on ball joints,Asher,but thing they are still OK as car feel very good tight responsive no clonks etc....just feel this grinding noise first when I got it car thould that tires rub on something? Any way breaks fell really good but when I turn hub it doesn't turn Mach I would say if u turn hard will spin one full turn hard to explain.......sorry,pain I booked bearings and new hubs on 9 December in garrage,did any body now good hubs buy? As new is£112 from Lexus can't afford £ 50 can buy good hubs? Do u guys now good company?

[Tomasz]

Hi guys just update about my problem with bearings booked garrage 9 DecemberI just checked my brakes and they are new,Olso checked pins and yea.....bottom ones got stick ans sized so took a bit time to pul them out but now wheels turn so better Olso brakes work in full mode the best ever!!!! I love my Lexus

[Tomasz]

Hello guys just update on my wheel bearings,hubs,just got back from garrage,earlier got it parts with guaranty....any way after £144.00 bill my car runs like racket,so nice big difference very happy again......just things extra to do......spark plugs iridium denso,and K&N panel just to breathe better,and black diamond discs.....update shortly,thanks.

[fosc]

Would you mind to measure your sport car height is it with original springs? From ground to wheel arch.