Wheel nuts for MK4 LS400

[moretea]

Hello folks, just looking for some help please.

Before the winter last year I decided to put a different set of alloy wheels onto my old LS which were actually from an old Audi I had years gone by.  As they were not a direct fitment I managed to source some special spacers/fitment discs (or whatever they are called).  I had to buy new nuts as well due to the tread being longer and slightly different on the nuts I had originally.  The thing is, I can not find my original nuts now and I am little unsure what nuts I would need.  The car is a 1998 LS400 and I am just looking to put back on the original 16" alloys.

Any help and advice would be greatly appreciated.

[cruisermark]

12mm x 1.5 flat seating nut which has a loose washer which does not drop out - look on eBay for Toyota Lexus nuts

[moretea]

Thank you Mark, could you please tell me if these ones on eBay would be correct:  http://www.ebay.co.uk/itm/Toyota-Wheel-Nuts-x-20-Avensis-Prius-Rav-4-Corolla-Cruiser-Verso-Yaris-Lexus-/222136522843?hash=item33b85e585b:g:UNEAAOSwzhVWs8jQ

Many, many thanks

[steve2006]

Think I still have a spare set of 20 if you want them, just pay me for the postage and they are yours.

[moretea]

Hello Steve, that is very very good of you.  If you have a paypal account or bank account then please let me know the cost and I will transfer the funds over.

Many thanks

[steve2006]

No problem, I'll PM you tomorrow.

I did the exact same thing a few years ago, bought another set then found the original nuts,since then having broken an LS400 I have plenty.

Just bought another set of aftermarket wheels and blow me I need yet another type of nuts (Tuner) as the holes in the wheels are too small for conventional nuts plus another set of spigot rings.

[moretea]

Typical Steve, I know I am going to be in the same boat.  Look forward to receiving your PM tomorrow.