How To Change Washer Jets

[Maz]

Hey Guys, does anyone know how to change the washer jets? i had a look under the bonnet, and they are in a very small gap, how do you take them aprats to change, see pics, the gaps are very narrow, any pics of the washer jets assembly by and chance guys?

Thank

under the bonnet with the washer jets in the gaps

[Scorpion]

There are 2 ways to do it i.e,from underneath or from the top.

1)If you get a long flathead screwdriver you can unclip the washers this way via the holes,once you've uncliped them they will pull up from the top of the bonnet,be careful not to let go of the pipe,pull the washer off and change it then just clip onto bonnet.

2)If you've got an old plastic card(credit card size)from the top of the bonnet grasp the washer between the fingers lift up as much as possible,slide the card between the washer/bonnet and press card and this will unclip it.

[PhoneDrome]

You want to change them? Which jets will replace them?

[Guest mark_tsang]

You want to change them? Which jets will replace them?

hope is not those washer jets with LED lights

[Wosket]

you guys havent seen the GB on triple washer jets then?

whats the betting i end up snapping a credit card when i do it?!

[PhoneDrome]

I heard that the new RX-washer-jets will fit. But they are colored in black only.

Does somebody know something about that?

[Wosket]

see here and go gold!

[PhoneDrome]

Going Gold in Germany is useless 'til now.

[aido]

That credit card trick works a treat - cheers guys :)

[Scorpion]

:winky: :winky: :winky:

[BESTY]

That credit card trick works a treat - cheers guys :)

yeh ive just done mine that way,cool.

[Scorpion]

I told ya'll....

[BESTY]

I told ya'll....

your such a clever boy :P

[Scorpion]

Same for the side repeaters too.

[BESTY]

Same for the side repeaters too.

great ,i`m getting some soon :winky:

[Maz]

so from the top with a credit card the easier way to change them? im worry i may scratch the paint work on my bonnet...

[aido]

so from the top with a credit card the easier way to change them? im worry i may scratch the paint work on my bonnet...

Yeah mate, if you look carefully there's a rubber seal around the old ones - I pushed the card in really hard into the rubber seal and lifted whilst applying pressure - didn't even touch the paint work so no scratches :)