Help needed removing rear door panel Mk IV LS400

[Newbie1]

I've managed to remove all screws, including the arm rest one and all clips. However, I cannot for the life of me remove the door switch unit, and it is around this area that the panel seems to be still fastened. The switch/ashtray unit does not pop up like the front door one and I've broken it trying to do so. I can see no retainer clips or screws after removing the ashtray, as with the older models. Any ideas?

[cornershop]

Anything for you here Phil:

http://lexus-doc(blocked word)/ileaf/lex98rm/98rmsour/1998/98ls400r/bo/readoo/disa.pdf

http://lexus-doc(blocked word)/ileaf/lex98rm/98rmsour/1998/98ls400r/bo/readoo/comp.pdf

http://lexus-doc(blocked word)/RepairManual1998.php

[steve2006]

The window switch panel is held in 0lace by spring clips, the tool to use is a small wall paper scraper, if you are still struggling let me know and I’ll remove one of mine to show you the clip positions.

[Newbie1]

Thank you, all. Those spring clips are a real bugger! Finally got there.

[steve2006]

23 hours ago, Newbie1 said:

Thank you, all. Those spring clips are a real bugger! Finally got there.

Now you’ve found that final screw holding the door panel on 

[Newbie1]

Next to undersealing, messing about with car doors and windows is my least favourite job! Anyway, two replacement doors now on which look a whole lot better than the old ones. 

Now, to find out why the passenger mirror is not folding in but otherwise works. Things you test AFTER putting everything back together.