Do Not Sell My Personal Information Jump to content


LS400 Electrics


Recommended Posts

What info can be obtained from the Diagnostic Port mounted on the top of a 1995 (UK registered) LS400 engine?

What equipment do I need to access the information?

Was a OBD type socket factory fitted to the 1995 LS400?

What Ohmic value should a healthy Camshaft Position Sensor measure?

Can anyone help me to source ECU wiring connection diagrams for this specific 1995 model?

Apologies for the number of questions but I need to find/fix a problem.

Thanks, 

Link to comment
Share on other sites


With there being a cam sensor on both cam gears you could measure both to see if they are the same value. If you do have a cam sensor fault it is quite common to find the wiring loom to the passenger side one damaged if it hasn’t been redressed correctly after a belt change....it can get chewed up by the serpentine belt.

Not too sure about the later model but earlier versions used a paperclip to read the codes by blinking lights sequences.

Also welcome to the LOC.

 

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...