Do Not Sell My Personal Information Jump to content


IS300h (2014) rear seat removal


Recommended Posts

I need to remove the rear back rests in my IS300h to give enough clearance (40cm) to fit a cupboard in  through the boot for transportation. I don't need to remove the seat itself (unless that is necessary first). There are lots of instructions on other models but I cannot find anything for the IS300h. Any help/photos welcome.

Link to comment
Share on other sites

Hello and welcome to the LOC.

The seat base needs to be removed first, there are 2 self locking clips at the front edge one on each side midwa6 between the transmission tunnel and door. Get you fingers under the seat base and tug sharply upwards to release.

The bolts for the seat back are at the bottom as shown in the picture, remove them and then lift the seat back up to disengage the top hooks.

 

1960F5D8-38B0-4D75-A575-57EBFCD73E9E.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...