LS400 Gen 1 strut rod bushing

[MotorDevil]

I've been getting a clunk in the front suspension. After some investigation it seems like the strut rod bushing was a common cause. This morning I took them off for a look, pretty easy job which is nice. However I was expecting to see a lot worse in the regards cracks in the rubber. What does every think of the these? Are they due replacement?

[ambermarine]

More likely to be the upper arm bushing check by lifting the front wheel off the ground an levering up from the bottom of the tyre with a bar ,at the same time grip the bushing on the end of the arm that connects to the top of the hub strut and it will move about if worn .

[Howplum]

Don't rule out the anti-roll bar drop link.

[MotorDevil]

OK, so I think the strut rod bushings are still good so will refit.

Will check the drop links, hopefully its that. If not then UCA is the next bet, and expensive one!