Headlight Breather

[whitie]

Is there an actual breather on the Headlight which can be adjusted?

I have taped off a hole as instructed in a IS300 white paper. but its only worked on one light.

Cheers

[Monster-Mat]

its on the back of the light......if you tape the holes up you will get MORE condensation

[whitie]

Is it on the small black box? The screw type attachment or is that one of the light beam adjustments?

[Monster-Mat]

if you look on the back of the light, there is a little flap.open this flap, you will see the filter.this arangement is the breather for the light, there should be 2 of these, one by the indicator, near the mounting bolts

[whitie]

It was that!! CHEERS!!!

[mattstheone]

ok might be a tad thick but i have just had a look at my oside lamp

and cannot see any breather or flap

Mine is a oct 200 is200 AND ITS THE O/S that is causing a problem

I guess the black box is the motor to adjust beam worked that out

can someone put a picture up to show where the breather is

please please & pretty please

:D