Do Not Sell My Personal Information Jump to content


Recommended Posts

Looking for some advice really. I had my ls460 on axle stands for 6 months. The battery died. When looking to get it back on the road I took it off the axle stands and the driving height has dropped right down. I then connected a fully charged battery expecting the compressor to kick in and nothing. 

I have tried disconnecting the negative terminal for 30 mins then connecting again and nothing. 

im guessing there needs to be some re calibration or maybe some fuses or relays have gone……….

Any help is much appreciated 

Link to comment
Share on other sites


I believe you need to start the engine. The compressor draws a LOT of current so the engine needs to be running or it won't run.
Otherwise check the height sensors were not dislodged when it was on the axle stands.

  • Like 1
Link to comment
Share on other sites

I had to put mine on a longer charge before the suspension started working correctly. I did a battery recondition as well. Sometimes takes 10-20 miles of driving to work 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership