Do Not Sell My Personal Information Jump to content


[ IS200d ] Injector seals removal


CazzyG
 Share

Recommended Posts

Hi All,

After getting excited removing all 4 injectors due to an excessive smoking issue, I am faced with a headache. The seals won't budge, I am using a wire coat hanger as described in another thread but can't get the seals to budge.

Photos attached, any help much appreciated.

Video of the smoking also attached, you can see where it turns from black/greyish to about bluish.

 

IMG_20220415_175311.jpg

IMG_20220415_175321.jpg

IMG_20220415_175331.jpg

IMG_20220415_175336.jpg

Link to comment
Share on other sites

On 4/16/2022 at 1:07 AM, Texas said:

Check out this vid 

 

OK got m8 thread bar and it was a hassle removing them until I broke it into 2 parts since it was too long. The angle from the break causes a cross thread on the seals and 3 of them pulled out with minimal hassle.

There is one ***** soaking in WD40

 

Unconventional methods alright 🙂👀

IMG_20220417_161038.jpg

IMG_20220417_161032.jpg

IMG_20220417_161018.jpg

IMG_20220417_161011.jpg

  • Like 1
Link to comment
Share on other sites

On 4/17/2022 at 4:11 PM, CazzyG said:

OK got m8 thread bar and it was a hassle removing them until I broke it into 2 parts since it was too long. The angle from the break causes a cross thread on the seals and 3 of them pulled out with minimal hassle.

There is one ***** soaking in WD40

 

Unconventional methods alright 🙂👀

IMG_20220417_161038.jpg

IMG_20220417_161032.jpg

IMG_20220417_161018.jpg

IMG_20220417_161011.jpg

Unconventional method prevail in the end (m10 rod) .... That was one tough son of a gun and on same cylinder I got error from injector value test on Techstream 😏. I hope that's the cause of my issue, next step get injectors tested and new seals.

IMG_20220421_171812.jpg

IMG_20220421_171950.jpg

IMG_20220421_171836.jpg

fault reading.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...