Stainless Braided Brake Hoses

[Maz]

Very temping, when will GB close matey? and also how hard to fit them?

[Gus Woodcock]

A set in stainless finish for me please Bazza. :)

[Bazza]

Very temping, when will GB close matey? and also how hard to fit them?

will be open till you put your name down

probably sometime next week

there as hard, as you are competent, in mechanics

probably hours work for professional (await feedback)

[n30jjb]

Can I have some stainless ones please. :D

[d3fy]

<snip>

there as hard, as you are competent, in mechanics

probably hours work for professional (await feedback)

So you'll come back to us on that one then, and let us know how hard they are to fit?

[Monster-Mat]

They will require a moderate ability in Mechanics, however if you have never changed brake pipes before and Bled the system i strongly recomend you get them changed by a competent person.

the biggest problem is obviously the fact that the brake pipes need removing and replacing, which in the process will break the air tight seal of the brakes, (air is not good in the brakes)

[Bazza]

They will require a moderate ability in Mechanics, however if you have never changed brake pipes before and Bled the system i strongly recomend you get them changed by a competent person.

the biggest problem is obviously the fact that the brake pipes need removing and replacing, which in the process will break the air tight seal of the brakes, (air is not good in the brakes)

what time scale would you put on this for a competant mechanic to carry out ?

[Monster-Mat]

if using a proper 2 post workshop ramp, so all 4 wheels can be removed, it should take no longer than an hour maximum, this includes the bleeding of the brake system aswell

[Stu]

mmmmmmmmmmm...................................

will have to get my mate to do them for me then me thinks!

Stu

[Maz]

Ok you Tempted me Bazza, can i have a set too please, RED please to mtach my capilers......???

[SteveAudioX]

Stainless Steel ones for me too.. same as Duncan Please...

[Bazza]

Stainless Steel ones for me too.. same as Duncan Please...

no problem stevie :)

[DaveEllen]

s/s for me red baron

[Fargo]

oh bazza,, S/S in green pleae,,...again...lol

[Bazza]

ok ....again :P

[Rob]

for the hoses that are coloured how are they? ie is it just a plactic sleeve or are they painted??

[Bazza]

for the hoses that are coloured how are they? ie is it just a plactic sleeve or are they painted??

Produced in a stunning variety of translucent colours using Nitrile Bonding during manufacture - it will stay flexible and will not discolour over time.

these are also TUV approved

and are available with a certificate

[Rob]

ok thanks barry, as it looks like it is a plastic sleeve ill go for the plain old stainless - 1 set pls also with the TUV cert if possible.

cheers

[TonyGoose]

I'll go with a set of silvery stainlessy ones please sir if i may B)

[Stu]

Are there any piccies of these anywhere?

Stu

[Bazza]

Are there any piccies of these anywhere?

Stu

could try here

[Stu]

Cheers bud, helped a bit!

Does anyone have any piccies of this kit on a car?

Just curious as to what they'll look like when on!

Stu

[jac114]

when will this group buy go ahead???

[Bazza]

any more ?

zee what colour mate ?

update here

[Bazza]

when will this group buy go ahead???

patience craigy boy