Do Not Sell My Personal Information Jump to content


Anyone Want Me To Bring Anything With Me


Rob
 Share

Recommended Posts

ok can obtain:

spiral wrap

silicone grease(for door seals/sunroof seals) - colin, steve

teflon coating

hi temp anti friction coating - chris, aido,steve

3M scotchcal (same material as x-pel) - barrie

wide range of sealants and RTV(white,black,heat resistant(red) ,grey,clear) from low adhesion to high temp

cold galvanising spray aido,steve,chris

anything - mat

limited quantities avilable first come first served etc

please put down who wants what and ill see what i can sort out for jae

PAUL: should have your "item" ready tomo :winky:

Link to comment
Share on other sites



Teflon coating please  ;)

TIA

what do u want it for? because i might have something better than the teflon

This is the supergaurd stuff right? :unsure:

Link to comment
Share on other sites


Put me down for what you think I might need Rob...

Would nay of this be usefull to me?

to be honest i think that the items of most use for nearly everybody would be

1.silicone grease as it stops the sunroof from creaking

2. the cold galvanise stops the rust on the spring/bypass assy

3. the high temp anti friction coating also for the supercharger spring/arm assy.

combine 2 +3 for best results.

Link to comment
Share on other sites

1.silicone grease as it stops the sunroof from creaking

2. the cold galvanise stops the rust on the spring/bypass assy

3. the high temp anti friction coating also for the supercharger spring/arm assy.

These 3 for me please Roberto..... ;)

Link to comment
Share on other sites

hi all,

ill be bringing along a few cans of the sprays and a couple tubes of the silicone grease (dow corning DC 4 if anyone want more detials) so there will be more than enough to go round.

I can say that the sprays etc are perfectly safe for use on the sc/moving parts etc, as for the grease, i have only used it for a few months so can not say 100% if it will do anything to the seals after long term use, but silicone will not degrade rubber.

Chris: i have been trying to bring one back to mine but all the fit ones have been sacked - only golden oldies now :crybaby:

Link to comment
Share on other sites

for those that didnt get to see me about the sprays/silicone grease etc:

steveaudio has the 2 cans - cold galvanise and the anti friction spray, these are to be passed round to whoever needs it - pm steve for details/arrange useage at meets etcv - read the instructions :excl::excl::excl:

silicon grease: ZEE has 1 tube and AIDO has 1 tube - contact them to arrange use of it.

Link to comment
Share on other sites

for those that didnt get to see me about the sprays/silicone grease etc:

steveaudio has the 2 cans - cold galvanise and the anti friction spray, these are to be passed round to whoever needs it - pm steve for details/arrange useage at meets etcv - read the instructions :excl::excl::excl:

silicon grease: ZEE has 1 tube and AIDO has 1 tube - contact them to arrange use of it.

Thanks Rob.

Actually I have Zee's lubricant :o

Link to comment
Share on other sites

 Share



×
×
  • Create New...