De Cat The Is200 Front Bit

[SteveAudioX]

Would anyone know the best procedure for this and how much it should cost?

[Fargo]

chop out the cats and weld in a straight section pipe..

i can help you remove the manifold and runn ya to a welder if you want steve..

[SteveAudioX]

Can ya? will ya? When ?

will the new addition be stainless or better?

[tdiplc]

................or better still, maybe put that money towards a decent manifold?

[Scorpion]

................or better still, maybe put that money towards a decent manifold?

well that will take up the odd pennies. :D

Just £300+ sheckles to find then

[Fargo]

think you may find that a local welder will do the job for 50 quid..

you let me know steve when youve found someone and ill give ya a hand,, i can have the manifold out in 30 mins,, however the s/c will need to come out as well,, so allow a couple of hours to be safe for removal...

[tdiplc]

think you may find that a local welder will do the job for 50 quid..

you let me know steve when youve found someone and ill give ya a hand,, i can have the manifold out in 30 mins,, however the s/c will need to come out as well,, so allow a couple of hours to be safe for removal...

Tell you what mate, if you can do that in a couple of hours and do a job I would be happy with, you've missed your vocation and should take a look at http://www.autosport.co.uk/dir_appoint_app...gIappointid=998

;)

[Scorpion]

think you may find that a local welder will do the job for 50 quid..

you let me know steve when youve found someone and ill give ya a hand,, i can have the manifold out in 30 mins,, however the s/c will need to come out as well,, so allow a couple of hours to be safe for removal...

Tell you what mate, if you can do that in a couple of hours and do a job I would be happy with, you've missed your vocation and should take a look at http://www.autosport.co.uk/dir_appoint_app...gIappointid=998

;)

Hes only got a 12mm spanner,is that o.k?

:D :D

[Fargo]

Sorry mark, wouldnt want to take a pay cut :P ... and besides couldnt hack the travel...

i shall time the removal of the manifold, including the s/c,, give you guys a benchmark to work from eh.. lmao..

i did say a couple of hours to REMOVE the manifold and s/c,, as for putting it all back,, i reckon same again..

then we'll talk salary yeh mark... ;)