Do Not Sell My Personal Information Jump to content


Is Stereo Pin Outs


Recommended Posts


Looking in the books i've found 2 possibilities.. how many pins in the connectors?

If 10 and 6 looks like they're in the 10way connector.

Looking into the connector on the unit (i think) ...

1 2 ---- 3 4

5 6 7 8 9 10

1=FR+, 2=FL+, 3=Acc, 4=+12v, 5=FR-, 6=FL-, 7=GND, 8=Antenna 12v, 10=illumination

Or if 12+18 looks like they're in the 18way.

1=B+ (red), 10=acc (black), 14=GND (shield)

It's all fed via the amp...

Note - this is just out of the books.

Might be more reliable from someone who's actually looked :)

Link to comment
Share on other sites

thanks ,

cant recall how many pins there were,, will have to get Raz to look..

the diags on .net are not for the older units,, even going to 2001..well they dont look like they are..

raz can you have a look at your block

Link to comment
Share on other sites


Paul like I said to you phone, I think taking direct feeds to both the power and acc may be my best option.

What I've found it probably tonys

http://www.installdr.com/Harnesses/Toyota-Wiring.pdf

This type of Pin doesnt fit.

The back of the OEM HU has 12pins and then 18 little ones. If i was to take Tonys second root. How would I know which is ground (Pin 14 on the smaller connector as there are no numbers on the connector)?

Link to comment
Share on other sites

Ok this is the rear of the OEM Head unit

18 Pin Connector 12 Pin Connector

- - - - - - - - - 05 04 |____|03 02 01

- - - - - - - - - 12 11 10 09 08 07 06

01=B+

10=Acc

14=Ground

but which pin is pin 14?

Link to comment
Share on other sites

Is it

21 20 19 18 17 16 15 14 13

30 29 28 27 26 25 24 23 22

or

09 08 07 06 05 04 03 02 01

18 17 16 15 14 13 12 11 10

Or have I got it totally wrong?

Your 'diagram' of the 12 pin connector matches the pic in the book.

Looks like only pins 9 + 10 are used (comms bus) and even then only if satnav is present.

So, based on that, the 18 pin will be as per your second option - ie. 1-18 ...

1=B+, 3=Amp+, 5=SigGnd, 7=mute, 8=FL, 9=FR, 10=Acc, 12=Ant+, 14=Gnd, 16=beep, 17=RL, 18=RR

Hope that helps :blush:

Link to comment
Share on other sites


Cheers Paul will check that when I wire up the rest of the system. Hopefully should get it sorted.

New Battery? hope not, well at least for this stage of the install.

Maybe when stage 2 is in action (Big Power Twin Subs & Amp) I'll get a power cap and uprated Battery...

Link to comment
Share on other sites

Cheers Paul will check that when I wire up the rest of the system. Hopefully should get it sorted.

New Battery? hope not, well at least for this stage of the install.

Maybe when stage 2 is in action (Big Power Twin Subs & Amp) I'll get a power cap and uprated battery...

You know what I meant :blush: uprated Battery :whistling:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...