Tte Charger

[petejenkin]

I need some help please. Those of you with the TTE Compressor will have noticed that the main pulley on the compressor itself has a black plastic cover on the front.

This cover is held on with 3 screws, and a bolt in the centre.

I need to remove this cover so it can be replaced with a polished one, but I dont want to remove it if there going to be surprises, i.e oil spillage or internal components that twang everywhere

has anyone removed this cover? What is behind it, and is it safe to remove?

Thanks

[Bazza]

I need some help please.  Those of you with the TTE Compressor will have noticed that the main pulley on the compressor itself has a black plastic cover on the front.

This cover is held on with 3 screws, and a bolt in the centre.

I need to remove this cover so it can be replaced with a polished one, but I dont want to remove it if there going to be surprises, i.e oil spillage or internal components that twang everywhere 

has anyone removed this cover?  What is behind it, and is it safe to remove?

Thanks

←

allways had the same thought myself :o

let me know what happens

and i will have a polished replacement one if you have some :D

[petejenkin]

I need to take the cover off first before I can get one made. maybe if there is enough interest I will have a few done.

I need to know if I can take it off first anyway

[Rob]

hi pete,

if u mean the flimsy black plastic cover then its ok to remove it, nothing behind there except the retaining bolt for the SC drive pulley - no oil etc (only oil is in the front of the main unit)

[Global_Grafix]

hi pete,

if u mean the flimsy black plastic cover then its ok to remove it, nothing behind  there except the retaining bolt for the SC drive pulley - no oil etc (only oil is in the front of the main unit)

←

Thanks Fluff ! :winky:

[Monster-Mat]

remember any metal cover you make would need to be balanced or it could prematurely wear the drive shaft bearings

[Rob]

hi pete,

if u mean the flimsy black plastic cover then its ok to remove it, nothing behind  there except the retaining bolt for the SC drive pulley - no oil etc (only oil is in the front of the main unit)

←

Thanks Fluff ! :winky:

←

Rob will do fine pete :D