Front Armrest

[Adie]

Hi,

I'm half way through fitting an arm rest to my IS200. I have been following a link from Brett ( cheers Brett) about the removal of the centre console. To which i have managed successfully. The problem i have is how to remove the hinge from the old lid in the centre console. I have removed the actuall lid but cant seem to find how to remove the hinge. Does it have to remain?

Any help much appreciated..

Thanks,

Adie

[necromax]

Have you looked here its a guide with pics by one of the guys from IS300.net

[Adie]

Have you looked  here its a guide with pics by one of the guys from IS300.net

←

Yes mate, Thats the one i've been using but it says nothing of removing the hinge off the old lid

[Brettster]

take out the drinks tray. there's some plastic tabs that stop it coming out all the way.

then remove the screws to the metal work that held the rear drink holder in place

you should be able to see the what was holding in the hinge then

[Adie]

take out the drinks tray. there's some plastic tabs that stop it coming out all the way.

then remove the screws to the metal work that held the rear drink holder in place

you should be able to see the what was holding in the hinge then

←

Thanks once more Brett you've been most helpful :D

[Brettster]

No Problem :)

post a pic when you have it all done.

I really miss the arm rest now, keep banging my elbow on the plastic forgetting its not there.!!

never mind

GS will be here soon :)

[Kazi]

Not sure why my original post was removed, all I asked was for some pics?

Edited January 18, 2005 by kazdul

[Adie]

No Problem :)

post a pic when you have it all done.

I really miss the arm rest now, keep banging my elbow on the plastic forgetting its not there.!!

never mind

GS will be here soon :)

←

All fitted. Not too hard once you know exactly what your doing. Looks great and feels even better :D

Going to post pictures of my car once i work out how to do it. Probably do a garage for when i fit all the other mods ;)