Gearstick And Gaiter Removal

[chib1177]

i dont want to damage anything so im asking is there a specific way to remove the gearshift gaiter and surround so i can get a look at the bits i need down below.

thanks

[Rob]

unscrew the gearknob - standard RH thread it might be very tight, on the chrome surround there are 3 LITTLE clips 1 at the back and 2 on each side, these break easily so dont be surprised if one or 2 break, mine are broken and there is no difference in its position.

remove ashtray things

prise the back end up of the chrome bit and gaiter, then just keep lifting and the 2 or 3 proper clips at the front will come free, loosen gaiter from the gearstick, disconnect wires etc and all is done.

[chib1177]

nice one

apart from the breaking bits

ill give it a go in the morning

[Rob]

the little clips are part of the chrome ring, but dont worry u wont notice it but try and be careful and u might get away without breaking anything - but they are VERY thin cheapy plastic.

[p.k.blaauw]

Click: Installing Short Shifter