Stud Pattern And Offset?

[NIcad7]

I understand that an IS200 stud pattern and offset is 5x114.3 40mm offset.

Is this correct and if i wanted to buy some wheels in the correct stud pattern but with a 35mm offset can i just use spacers to push them out???

or are there other problems involved?

Please advise guys i know you can help!!!!!!!!!!!!

[Bazza]

correct offset is 45mm

by adding spacers the offset is reduced

so a 35mm offset with a 5mm spacer will make a 30mm offset

wouldnt recommend any less than a 40mm offset,

will depend if it will be lowered as well

centre bore is 60.1mm

what wheels are you looking at ?

i might have a set that might interest you

[NIcad7]

Ive found a nice set on eBay from the states sum 18" deep dish stern wheels in chrome.

would look awesome on my graphite lex and theyre going for around £700 +

including shipping/insurance!!!

So i need them to be the correct offset of higher

Thanks for your quick reply mate!

What have you got then that i may be interested in?

[Bazza]

18 x 8

OZ superlegarras III (rare as rocking horse poop)

split rims, dunlops sp`s

low mileage in perfect condition

£850 :)

[marcus]

18 x 8

OZ superlegarras III (rare as rocking horse poop)

split rims, dunlops sp`s

low mileage in perfect condition

£850 :)

←

O i see his cash Greener than my cash ah :P :winky:

[Bazza]

18 x 8

OZ superlegarras III (rare as rocking horse poop)

split rims, dunlops sp`s

low mileage in perfect condition

£850 :)

←

O i see his cash Greener than my cash ah :P :winky:

←

not at all

just need some room

first come first served :D

[marcus]

18 x 8

OZ superlegarras III (rare as rocking horse poop)

split rims, dunlops sp`s

low mileage in perfect condition

£850 :)

←

O i see his cash Greener than my cash ah :P :winky:

←

not at all

just need some room

first come first served :D

←

I know bazza just pulling your lag mate :winky: :P

[NIcad7]

Got any pics of them mate?

Sounds good though :D

Just wanna see how deep they are.

Sure you dont wanna get rid of your racing hart's for that price :winky:

[Bazza]

Got any pics of them mate?

Sounds good though  :D

Just wanna see how deep they are.

Sure you dont wanna get rid of your racing hart's for that price    :winky:

←

these are them

[NIcad7]

Ah man i would have loved to have them.

Ive just had to pay out for some coilovers that i couldnt let get away!

Sorry matey! :)

[marcus]

Got any pics of them mate?

Sounds good though  :D

Just wanna see how deep they are.

Sure you dont wanna get rid of your racing hart's for that price    :winky:

←

these are them

←

Bazza PM me mate we need to talk about them wheels :winky:

[Serran]

correct offset is 45mm

by adding spacers the offset is reduced

so a 35mm offset with a 5mm spacer will make a 30mm offset

wouldnt recommend any less than a 40mm offset,

will depend if it will be lowered as well

centre bore is 60.1mm

what wheels are you looking at ? 

i might have a set that might interest you 

←

i disagree.. im currently using a +30 offset on all corners for my track rims. you will need to roll the guards pretty much all around the wheel well. they are even more perfect fit than a +40 offset. of course this depends on your camber settings. but i dont use anything overly too agressive. i do have a fairly suspension/sway bar setup too.

having said that, i do use a +40 offset for 7.5 front and 8.5 rear.. and that offset is perfect setup for steet.

pics of a +30 offset

side view:

front view: